Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

1.8" SATA to 2.5" IDE converter?

T40/T41/T42/T43 Series
Post Reply
Message
Author
ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

1.8" SATA to 2.5" IDE converter?

#1 Post by ChugokuOtaku » Mon Mar 15, 2010 3:40 pm

I've been considering the different SSD options for my T43, and came across this older thread about the possibility of having an SATA to IDE converter. If the SATA drive is a 1.8" form factor, then space for the converter chip shouldn't be too much of a problem.

If this is indeed an option, then us T4x users should have plenty of cheaper SSD options available, considering current PATA interface SSDs can cost just as much as the T4x itself. I understand that I could use the ultrabay SATA caddy to install an SATA SSD, but I like the idea of keeping the bay modular if possible.

Does anyone know if such a converter exists?

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 17303
Joined: Sun Feb 25, 2007 11:28 am
Location: Belgrade, Serbia

Re: 1.8" SATA to 2.5" IDE converter?

#2 Post by ajkula66 » Mon Mar 15, 2010 7:40 pm

Well, you'll lose a LOT of speed converting SATA to PATA...then reversing that...not worth it IMHO.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

One FlexView to rule them all: A31p

Abused daily: T520, X200s


PMs requesting personal tech support will be ignored.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#3 Post by ChugokuOtaku » Mon Mar 15, 2010 8:14 pm

I'm sure it'll be up against a speed penalty with this type of setup, but do you know how slow it actually gets?

I can probably go grab one of these adapters down at Microcenter later this week and perform a speed test. I guess the real test would be how this sort of setup affects the seek times of the SSD.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 17303
Joined: Sun Feb 25, 2007 11:28 am
Location: Belgrade, Serbia

Re: 1.8" SATA to 2.5" IDE converter?

#4 Post by ajkula66 » Mon Mar 15, 2010 8:38 pm

ChugokuOtaku wrote:
but do you know how slow it actually gets?
I don't have the actual figures, but let's put it this way: at the current $/GB ratio of the SSDs, I'm not even remotely tempted to try it out.

Personally, I'm still quite pleased with my oh-so-not-trendy-anymore PATA 7200rpm drives in my T43 and T43p...
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

One FlexView to rule them all: A31p

Abused daily: T520, X200s


PMs requesting personal tech support will be ignored.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#5 Post by ChugokuOtaku » Mon Mar 15, 2010 8:42 pm

ajkula66 wrote: Personally, I'm still quite pleased with my oh-so-not-trendy-anymore PATA 7200rpm drives in my T43 and T43p...
Believe me, I was like that too, until I put Win7 on my 64gig Kingspec in my x41, and that's not even considered a fast SSD, but that machine flies compared to my T43's 7200rpm PATA now, which is why I'm trying to consider all my SSD options for my T43

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 17303
Joined: Sun Feb 25, 2007 11:28 am
Location: Belgrade, Serbia

Re: 1.8" SATA to 2.5" IDE converter?

#6 Post by ajkula66 » Mon Mar 15, 2010 10:28 pm

Oh, please don't get me wrong, I do understand the sentiment entirely. It's just that I don't see the gain in machine's speed and responsiveness matching the expense, but that's just me.

If you choose to take the SSD route, by all means keep us posted.

Good luck.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

One FlexView to rule them all: A31p

Abused daily: T520, X200s


PMs requesting personal tech support will be ignored.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#7 Post by ChugokuOtaku » Tue Mar 16, 2010 8:24 am

After digging around a bit more, it seems like the only readily available option I have (which I'm sure many of you have come across already) is to employ one of those 1.8" ZIF to 2.5" IDE interface adapters like this one here with a 1.8" ZIF SSD. The ones offered by SuperTalent offer good read speeds of 80MB/s with slightly better than 7200rpm write speeds of 40MB/s, same ones employed in those MB Airs I believe. I benchmarked my 60gig 7K60 last night with CrystalMark, and got about 30/30 on read/write sustained. Random read/write speeds were a little too embarrassing to post here. Perhaps the 100gig versions are a bit faster?

I'd much prefer the original setup I had in mind, since I'd like to employ the drive in a modern machine the day my T43 finally gives out, where as with a ZIP SSD, there's little value in reusing it considering modern SSD specs.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

bobones
Posts: 29
Joined: Fri Oct 14, 2005 1:26 am
Location: Glasgow, UK

Re: 1.8" SATA to 2.5" IDE converter?

#8 Post by bobones » Tue Mar 16, 2010 12:20 pm

I've been looking at SSDs for my T43 too. One of the options that I've read about on these forums is booting off a SATA SSD in the ultrabay using a SATA caddy (either 3rd party or a modified T60 caddy). The caddy has a SATA/PATA bridge and the results are good. I'm kind of put off by this solution because I then lose use of the dvd/cd drive.

The other option I've considered is a native PATA SSD like the Kingspec, but I'm not convinced by their quality. The Runcore Pro IV PATA SSDs as seen on ebay look a bit better because they seem to be indilinx controllers and the SATA versions have really good benchmarks and reviews.

Remember the the benchmarks that make the difference in real world use are small random reads and writes, so the IDE limitations are not going to apply.

Don't know if I could put up with the 2010 error though :?
IBM T43 2668-F7G : Pentium M760 2GHz : 15" SXGA+ IPS Flexview : 80GB 5400rpm HD : NMB KB : Win7P
Lenovo W500 4062-3CG : T9400 C2D 2.53GHz : 15.4" WUXGA Samsung : 250GB 7200rpm FDE HD : ALPS KB : Win8P
Lenovo T430s 2356-GCG : Core i7-3520M 2.90GHz : 14" HD+ : 180GB Intel SSD : Win8P

sjh953
Posts: 36
Joined: Wed Oct 18, 2006 4:53 pm
Location: California

Re: 1.8" SATA to 2.5" IDE converter?

#9 Post by sjh953 » Tue Mar 16, 2010 2:10 pm

For the last several weeks I've been using the 64gb Transcend PATA SSD below in my T42p with absolutely no issues:

http://www.newegg.com/Product/Product.a ... 6820208431

This Newegg listing also has a lot of comments in the 'Review' section.

I used Acronis to copy everything over from my old drive, then moved that drive into the CD bay to use as a backup, for my Firefox cache, for misc file storage, daily Acronis system backups, etc.

Performance-wise, I'm very pleased. The machine is much more responsive and I don't have the lag I saw CONTINUOUSLY while waiting for the old drive to finish beating itself to death for even the most basic tasks.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#10 Post by ChugokuOtaku » Tue Mar 16, 2010 2:26 pm

I've had no trouble with the Kingspec in my x41 despite it having a jmicron controller. Win7 runs really fast on it, doesn't hang or experience those 1 to 2 second pauses during IMs. I had trouble with XP on it though, possibly due to alignment issues.

I've looked into all the 2.5" Kingspec PATA options so far, and the 64gig versions are right below $200 on ebay, with the 128gig versions near $400. My gf in China helped me check over there(where Kingspec is based) and she can get a 128gig there locally for right over $300, which is what I'm considering. The 64gig versions over there is only $10-15 cheaper than here. The 64gig ZIF SSDs can be had for under $160 with cashback through Ebay, which is why I was thinking about getting one of those instead of PATA.

I get the 2010 error on my x41, but with the latest BIOS it can just boot past it without pausing. Don't worry about putting up with the error during bootup. Once you're used to how snappy the SSDs are, you'd be more than willing to put up with it.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

bobones
Posts: 29
Joined: Fri Oct 14, 2005 1:26 am
Location: Glasgow, UK

Re: 1.8" SATA to 2.5" IDE converter?

#11 Post by bobones » Tue Mar 16, 2010 5:46 pm

Can anyone post Crystal DiskMark scores for their Kingspec, Transcend or other PATA SSDs in the T43?

I'm starting to get really tempted, especially by the Runcore Pro IVs as their 4k random read and write scores seem to be really good (http://www.runcorestore.com/ProductDeta ... 1249411929):
Random 4K Read Rate* 21MB/s
Random 4K Write Rate* 18MB/s
IBM T43 2668-F7G : Pentium M760 2GHz : 15" SXGA+ IPS Flexview : 80GB 5400rpm HD : NMB KB : Win7P
Lenovo W500 4062-3CG : T9400 C2D 2.53GHz : 15.4" WUXGA Samsung : 250GB 7200rpm FDE HD : ALPS KB : Win8P
Lenovo T430s 2356-GCG : Core i7-3520M 2.90GHz : 14" HD+ : 180GB Intel SSD : Win8P

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1161
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#12 Post by Norway Pad » Tue Mar 16, 2010 9:48 pm

I see the above mentioned solution where a 1.8" SSD drive and a converter could be fitted inside the primary drive compartment to be a great idea, if something like that is possible. The condition must be that the cover will still fit, and no part is peeking out. After all, SATA is the area where development is done, and where we will have the greatest variety of sizes and form factors, both SSDs and non-SSDs, in the future.

I see this as a possible backup solution the day PATA drives becomes harder to get and more expensive, because no one is manufacturing them anymore. I don't know if that is likely to happen in many years still, but worth looking into. At that time the only people still using the T4x machines would be people with special interest, like us here on this forum. :)
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#13 Post by ChugokuOtaku » Wed Mar 17, 2010 8:12 pm

After further investigation, I think I've arrived much closer to the answer I was looking for:
Depending on the specific form factor of machines in question, there are two options:

http://www.dealextreme.com/details.dx/sku.19734

http://www.cooldrives.com/2sahadrtoide.html

Obviously, us Thinkpadders are gonna be looking at the 2nd option.
Judging from the pictures, modifications to the chassis may be necessary for installation of the adapter. From what I can see, it appears that the adapter itself can be semi-permanently mounted inside the HDD bay, and then the HDD caddy can be modified for 1.8" SATA drive mounting.

Over at the notebookreview forum, looks like users of the 2510p who are stuck in similar situations as our fellow X4x users, have tested the SATA option using optical bay caddies and posted some very useful benchmarks of their findings. Coincidentally, I'm all too familiar with the 2510p since I work with them at work almost everyday, and those 1.8" ZIF drives are painfully slow.

After reading through all this, I'm beginning to question the benefits of such a setup, and made a quick comparison of benefits and drawbacks of the 3 different SSD setup options.

With the above option:


Advantages:
1. Keep internal optical bay available
2. SSD reusable in future machines.

Disadvantages:
1. Irreversible modification to chassis may be necessary.
2. Judging by the expected lifespan of T4x notebooks, SATA SSD installed might have laughable performance compared to future SSDs by the time these notebooks really reach the end of their cycle.


With native PATA SSD option:

Advantages:
1. Keep internal optical bay available.
2. No adapter/hardware modding necessary.

Disadvantages:
1. Higher cost per gigabyte (SATA SSDs currently dropping close to $2/gig while PATA SSDs are well over $2.50/gig)
2. Almost guaranteed obsolescence of the SSD.


With SATA SSD in SATA Ultrabay caddy:

Advantages:
1. SSD reusable in future machines.
2. No adapter/hardware modding necessary.
3. Lowest projected cost
4. Availability of both 1.8" and 2.5" SSDs for installation
5. No 2010 error (not considered much of an advantage by some)

Disadvantages:
1. Loss of internal optical bay availability
2. (same as 2nd disadvantage of 1st option.)


All that being said, I'm starting to lean towards the SATA SSD caddy option(partially since I already have an SATA T4x caddy). Perhaps X3x user, lacking an ultrabay, would take a greater interest in the 1st option.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

Re: 1.8" SATA to 2.5" IDE converter?

#14 Post by sjthinkpader » Wed Mar 17, 2010 11:30 pm

ChugokuOtaku wrote:I've been considering the different SSD options for my T43, and came across this older thread about the possibility of having an SATA to IDE converter. If the SATA drive is a 1.8" form factor, then space for the converter chip shouldn't be too much of a problem....
I think you are looking for this:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0506156393
bobones wrote:Can anyone post Crystal DiskMark scores for their Kingspec, Transcend or other PATA SSDs in the T43?

I'm starting to get really tempted, especially by the Runcore Pro IVs as their 4k random read and write scores seem to be really good (http://www.runcorestore.com/ProductDeta ... 1249411929):
Random 4K Read Rate* 21MB/s
Random 4K Write Rate* 18MB/s
Look at the table posted on Aug 8, 2009
http://forum.thinkpads.com/viewtopic.ph ... 1&start=30
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#15 Post by ChugokuOtaku » Thu Mar 18, 2010 9:04 am

sjthinkpader wrote:I think you are looking for this:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0506156393
From the picture, that's exactly what I had in mind. :D

except... I ran into another problem:
After a quick search for some reasonably priced 1.8" SATA SSDs, I noticed from the pictures that the Intel SSDs don't use the standard SATA connection, but rather the notebook specific slimline/micro SATA interface. Other SSDs like this one by Super Talent uses the same standard. Apparently all current 1.8" SSDs employ this type of interface. It happened that I was tearing through a dead gateway machine the other day, and noticed this connection on the optical drive, but didn't give too much thought to it. A quick google search led me to adapters like this one, but these are designed to allow notebook optical drives to be used in desktop, and modification may be necessary to join this to the above mentioned IDE to standard SATA adapter. A search for slimline/micro SATA to IDE adapter didn't turn up anything, so I'm guessing there's really no readily available option to employ 1.8" SATA SSD in our T4x at this point.

UPDATE:

After digging around a bit more, it looks like there may be light at the end of the tunnel after all. This little adapter, can easily bridge a standard SATA + power connection to the slimline/micro SATA interface. My only concern now is the length of this interface adapter + the SATA to IDE converter... may be an extremely tight fit, if it fits at all.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

Re: 1.8" SATA to 2.5" IDE converter?

#16 Post by sjthinkpader » Thu Mar 18, 2010 6:57 pm

ChugokuOtaku wrote:...
From the picture, that's exactly what I had in mind. :D

except... I ran into another problem:
After a quick search for some reasonably priced 1.8" SATA SSDs, I noticed from the pictures that the Intel SSDs(pix1) don't use the standard SATA connection, but rather the notebook specific slimline/micro SATA interface(pix2). Other SSDs like this one by Super Talent(pix3) uses the same standard. Apparently all current 1.8" SSDs employ this type of interface....
Your pix1 and pix3 is actually the same connector, pix1 is viewed from the top and pix3 is viewed from the bottom. It is commonly known as Micro-SATA. The PATA to Micro-SATA adapter should work. I don't have one so I don't know if it'll be too long for the 2.5 inch HDD slot.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#17 Post by ChugokuOtaku » Mon Mar 22, 2010 7:43 pm

sjthinkpader wrote:
ChugokuOtaku wrote:...
From the picture, that's exactly what I had in mind. :D

except... I ran into another problem:
After a quick search for some reasonably priced 1.8" SATA SSDs, I noticed from the pictures that the Intel SSDs(pix1) don't use the standard SATA connection, but rather the notebook specific slimline/micro SATA interface(pix2). Other SSDs like this one by Super Talent(pix3) uses the same standard. Apparently all current 1.8" SSDs employ this type of interface....
Your pix1 and pix3 is actually the same connector, pix1 is viewed from the top and pix3 is viewed from the bottom. It is commonly known as Micro-SATA. The PATA to Micro-SATA adapter should work. I don't have one so I don't know if it'll be too long for the 2.5 inch HDD slot.
Yeah, I know they're the same. I was only giving two examples. I only found PATA to standard SATA adapter, not micro. If you look at the description on the one from Ebay, they're specifically 7 + 15 pin SATA interface, which is the standard full SATA + power interface, not the MicroSATA, which doesn't have the full 15 pin contacts for power, which is why I linked another standard 7 + 15 pin SATA interface to MicroSATA interface adapter.

Correction to my earlier post, slimline and micro are actually two separate standards.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

Re: 1.8" SATA to 2.5" IDE converter?

#18 Post by sjthinkpader » Thu Mar 25, 2010 1:21 am

I see. There is a small shop in Akihabara near the Suehirocho stn that carry many different adapters. Last time I went then, I didn't look for a IDE-microSATA adapter. But I will take a look next time in Tokyo.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#19 Post by ChugokuOtaku » Mon Mar 29, 2010 12:24 pm

sjthinkpader wrote:I see. There is a small shop in Akihabara near the Suehirocho stn that carry many different adapters. Last time I went then, I didn't look for a IDE-microSATA adapter. But I will take a look next time in Tokyo.
If there is such a converter/adapter readily available, I'm sure many of us here would be very interested in getting some.

I came across that 40gig Kingston SATA SSD deal for $75 at Amazon today, couldn't hold out and pulled the trigger. Guess I'll be losing my ultrabay after all.

Question regarding TRIM: Is it supported if the SATA SSD is going through a converter to PATA?

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#20 Post by ChugokuOtaku » Sun Apr 04, 2010 8:30 pm

Got my 40gig Kingston yesterday.
Win7 experience gave my drive a 5.9 out of the box
Crystal benchmarks below:

-----------------------------------------------------------------------
CrystalDiskMark 3.0 Beta5 (C) 2007-2010 hiyohiyo
Crystal Dew World : http://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/sec [SATA/300 = 300,000,000 bytes/sec]

Sequential Read : 90.097 MB/s
Sequential Write : 43.972 MB/s
Random Read 512KB : 79.964 MB/s
Random Write 512KB : 43.705 MB/s
Random Read 4KB (QD=1) : 14.796 MB/s [ 3612.2 IOPS]
Random Write 4KB (QD=1) : 20.507 MB/s [ 5006.7 IOPS]
Random Read 4KB (QD=32) : 18.887 MB/s [ 4611.1 IOPS]
Random Write 4KB (QD=32) : 30.520 MB/s [ 7451.2 IOPS]

Test : 100 MB [C: 30.4% (11.3/37.2 GB)] (x5)
Date : 2010/04/04 21:13:28
OS : Windows 7 Enterprise Edition [6.1 Build 7600] (x86)


It's apparent that the sequential read is being capped below 100MB/s due to the SATA to IDE bridge.
Sequential write is a bit slower than my 64gig Kingspec, but sequential read and random read/write 4KB is much faster.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

Nomgle
Posts: 11
Joined: Tue Nov 09, 2010 2:39 am
Location: North Yorkshire, United Kingdom

Re: 1.8" SATA to 2.5" IDE converter?

#21 Post by Nomgle » Tue Nov 09, 2010 6:20 pm

ChugokuOtaku wrote:I've been considering the different SSD options for my T43, and came across this older thread about the possibility of having an SATA to IDE converter. If the SATA drive is a 1.8" form factor, then space for the converter chip shouldn't be too much of a problem.

Does anyone know if such a converter exists?
Yep - I think you need one of these - http://www.diytrade.com/china/4/product ... apter.html

There should be more than enough space to fit a 1.8" Micro-SATA drive like the Intel X18-M onto the converter.

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1161
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#22 Post by Norway Pad » Tue Nov 09, 2010 10:45 pm

Has anyone actually tried to fit an adapter like this + a 1.8" drive in a the bay of a T4x? Otherwise I can probably find the size of the X 18-M online and try to calculate the size of the adapter from the picture.
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

Nomgle
Posts: 11
Joined: Tue Nov 09, 2010 2:39 am
Location: North Yorkshire, United Kingdom

Re: 1.8" SATA to 2.5" IDE converter?

#23 Post by Nomgle » Tue Nov 09, 2010 11:36 pm

Norway Pad wrote:Has anyone actually tried to fit an adapter like this + a 1.8" drive in a the bay of a T4x? Otherwise I can probably find the size of the X 18-M online and try to calculate the size of the adapter from the picture.
I've never done it no, but the 1.8" drives are much smaller than the regular 2.5" units - I think there will be plenty of room for the adapter :)

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#24 Post by ChugokuOtaku » Wed Nov 10, 2010 10:54 am

Nomgle wrote: Yep - I think you need one of these - http://www.diytrade.com/china/4/product ... apter.html

There should be more than enough space to fit a 1.8" Micro-SATA drive like the Intel X18-M onto the converter.
Okay, how many ppl here would be interested in getting one of these things?

I got my gf in China to contact the local office there, and a minimum domestic order is $100USD, while minimum international order is $1000.
I can ask her to place a $100USD order and then get some friends to bring them over to the States.

If these are $5 a pop as the English site had indicated, then I'll need at least 10-15 ppl who are interested.

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1161
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#25 Post by Norway Pad » Wed Nov 10, 2010 2:50 pm

I'm interested in one, so count me in.

Looking at pictures of the X18, where it's next to the X25, it seems like there should be enough room for the adapter without exceeding the size of the X25. The condition is that the X18 can be plugged directly into the adapter. The electronic component located on the left hand side of the micro-SATA connector seems to maybe prevent that, but.. I don't know. For $5 and even $10, I'm willing to give it a try. :)

I see this as a getting the chance to use SATA SSD technology in a T4x, as PATA and SATA drives will move in very opposite directions in the future when it comes to price and availability.
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

Nomgle
Posts: 11
Joined: Tue Nov 09, 2010 2:39 am
Location: North Yorkshire, United Kingdom

Re: 1.8" SATA to 2.5" IDE converter?

#26 Post by Nomgle » Fri Nov 12, 2010 4:59 am

Norway Pad wrote:The condition is that the X18 can be plugged directly into the adapter. The electronic component located on the left hand side of the micro-SATA connector seems to maybe prevent that, but.. I don't know.
I hope that the 1.8" drives are narrow enough to fit alongside the component on the left - otherwise you couldn't actually plug any drive in, and the adapter would be totally useless :mrgreen:

I'm also interested in one - if you Google the part, it's available from plenty of sellers - you might be able to find one that can supply a smaller order value ?

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1161
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#27 Post by Norway Pad » Fri Nov 12, 2010 11:17 am

Nomgle wrote:I hope that the 1.8" drives are narrow enough to fit alongside the component on the left - otherwise you couldn't actually plug any drive in, and the adapter would be totally useless :mrgreen:
My thought was that it *could* be meant for use with a cable or other proprietary connectors. That doesn't make sense, and I believe it works like you describe, that the drive is narrow enough to be plugged in next to it. But I have seen a lot of things that doesn't make sense, so nothing surprises me.
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#28 Post by ChugokuOtaku » Fri Nov 12, 2010 11:33 am

Nomgle wrote:if you Google the part, it's available from plenty of sellers - you might be able to find one that can supply a smaller order value ?
Googled and found about 4 English sites selling that specific item, all from the same source in China. All of them require a minimum of 100 units per order.

Bad news:
My gf called their office in China again today, and it turns out the minimum order over there is 100 units as well, not $100 USD. Straight from the factory they're $4.8 per unit, and then there's shipping, etc...

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

Norway Pad
ThinkPadder
ThinkPadder
Posts: 1161
Joined: Mon Jul 13, 2009 2:50 pm
Location: Meridian, ID & Oyer, Norway
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#29 Post by Norway Pad » Fri Nov 12, 2010 12:01 pm

Ouch. Seems like they are only manufactured on demand, and not kept in stock at all. So you probably won't be able to buy one even if you show up in their office in person.

If someone is willing to buy a 100 unit batch, I would be willing to increase my order to 5, as I see this as an interesting concept. So with one for Nomgle as well, there's only 94 left to sell. :-)
Bjorn
THINKPAD collector. Only missing a proper RetroThinkpad.

ChugokuOtaku
Sophomore Member
Posts: 226
Joined: Mon Oct 01, 2007 8:09 am
Location: Herndon, VA
Contact:

Re: 1.8" SATA to 2.5" IDE converter?

#30 Post by ChugokuOtaku » Fri Nov 12, 2010 2:06 pm

Norway Pad wrote:If someone is willing to buy a 100 unit batch, I would be willing to increase my order to 5, as I see this as an interesting concept. So with one for Nomgle as well, there's only 94 left to sell.
I'll be taking at least 5 myself, so we're down to 89

X1 Carbon Gen 3, QHD non-Touch, i5, 8gig, 480gig M500
X1 Carbon Gen 1, i5, 8gig, 256gig Sandisk
T420si, i3, 16gig, 256gig M4
x60T SXGA+, 1.5Ghz, 3gig, 80gig X25-M G1
T43 SXGA+, 1.86Ghz, 2gig, 60gig Agility 2 + 160gig 5K80
T42 SXGA+, 1.7Ghz, 2gig, 80gig X18-M G1
x41 / T22 / 380ED

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T40/T41/T42/T43 Series”

Who is online

Users browsing this forum: No registered users and 53 guests