Reviving this thread again...
Would I need 2 VRM's for 2 processors, or does the Z Pro only need one? Pardon my newbness...
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
IBM Intellistation maximizing RAM
Re: IBM Intellistation maximizing RAM
Blackj, your IntelliStation 9228 already has one built-in VRM on the motherboard to support a single occupied socket.
On the top edge of the motherboard nearest the power supply is the edge connector mount for the second VRM.
You'll need to source and install one of those before you can add a second Xeon (dual core or quad core) to the system.
On the top edge of the motherboard nearest the power supply is the edge connector mount for the second VRM.
You'll need to source and install one of those before you can add a second Xeon (dual core or quad core) to the system.
-
- Freshman Member
- Posts: 99
- Joined: Thu Aug 12, 2010 5:45 pm
- Location: Canada
Re: IBM Intellistation maximizing RAM
Earlier in the thread it was mentioned that non-ECC RAM could be used-- I am certain that FB-DIMMs have a different notch?
2x T60p, 1x T61, loads of 701Cs, 1x WorkPad Z50, 2x TransNotes other random thinkpads...
-
- Posts: 1
- Joined: Thu Nov 12, 2015 5:56 pm
- Location: Salem, NH
Re: IBM Intellistation maximizing RAM
Hi Everyone,
i have acquired an Intellistatino Z Pro 6223, and for the life of me i cannot get windows 7, 8, or 10 installed on this machine.
I was able to install WinXP x64 perfectly fine. I only have an 80GB IDE drive and an IDE DVD-ROM drive in the machine currently.
I've tried to install win7 with SATA raid and SCSI raid, no dice on each.
ran a hardware check, everything passed w/o issue.
Here are the specs:
BIOS ver 1.7
Dual XEON 3.0Ghz
3GB PC2-3200 RAM Non-ECC (512x6)
changed every possible setting in the BIOS, still no luck. i have the HDD on ATA channel 0 and the DVD drive on Channel 1. HDD is set to master for jumper settings, and the DVD drive set to slave. If i leave it on CS, some reason it only detects the HDD, so i had to manually set the jumper on each so the computer can recognize both drives.
the only thing in the BIOS that is still enabled is SATA raid and SCSI raid, but no drives are installed. i was hoping to get win7 installed and install the drivers for them so i can have both SATA and SCSI raid setup for more drives.
Any assistance would be appreciated.
Thank you
i have acquired an Intellistatino Z Pro 6223, and for the life of me i cannot get windows 7, 8, or 10 installed on this machine.
I was able to install WinXP x64 perfectly fine. I only have an 80GB IDE drive and an IDE DVD-ROM drive in the machine currently.
I've tried to install win7 with SATA raid and SCSI raid, no dice on each.
ran a hardware check, everything passed w/o issue.
Here are the specs:
BIOS ver 1.7
Dual XEON 3.0Ghz
3GB PC2-3200 RAM Non-ECC (512x6)
changed every possible setting in the BIOS, still no luck. i have the HDD on ATA channel 0 and the DVD drive on Channel 1. HDD is set to master for jumper settings, and the DVD drive set to slave. If i leave it on CS, some reason it only detects the HDD, so i had to manually set the jumper on each so the computer can recognize both drives.
the only thing in the BIOS that is still enabled is SATA raid and SCSI raid, but no drives are installed. i was hoping to get win7 installed and install the drivers for them so i can have both SATA and SCSI raid setup for more drives.
Any assistance would be appreciated.
Thank you
-
- Similar Topics
- Replies
- Views
- Last post
-
-
600e won't take any ram sticks
by Gonzaleitor » Mon Oct 23, 2023 11:30 pm » in ThinkPad Legacy Hardware - 2 Replies
- 4648 Views
-
Last post by Gonzaleitor
Tue Oct 24, 2023 9:50 am
-
-
-
FS: Intel Core i7-3630QM CPU + RAM
by PiZzA EnGiNeEr » Mon Oct 30, 2023 12:26 am » in Marketplace - Forum Members only - 1 Replies
- 1940 Views
-
Last post by wilocampo
Thu Nov 30, 2023 2:59 am
-
-
-
2 questions, RAM upgrade and OS downgrade on a W520
by NoPyro » Sat Dec 02, 2023 1:55 pm » in ThinkPad W500/W510/W520 and W700/W701 Series - 9 Replies
- 6974 Views
-
Last post by mikemex
Thu Feb 22, 2024 1:47 am
-
-
-
[Question] Does X280 i3 4gb soldered only have one slot of ram?
by benlimanto » Thu Dec 14, 2023 10:07 am » in ThinkPad X230-X280 / X390 Series - 3 Replies
- 2462 Views
-
Last post by benlimanto
Thu Dec 14, 2023 6:39 pm
-
Who is online
Users browsing this forum: No registered users and 45 guests