Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
X60s dead
-
seaweedsl
- Sophomore Member
- Posts: 240
- Joined: Thu Oct 12, 2006 2:06 pm
- Location: Old Mexico & NEW Mexico (US)
X60s dead
Hello all. I bought an x60s (or was it an X61s?) last fall for a friend, a teacher who lives in Mexico. I'm in the US and she just wrote me that her x60s has suddenly failed. It won't start up and just gives off a four beep code. She pulled the battery while unplugged, but it does the same. No other leds or signs of life apart from the beep code.
I've asked her for the machine type and to verify the beep code again, but apart from that, can anybody suggest likely problems APART from the motherboard? I'm prepared to buy her a new board, but since I've seen no reports of these failing, I wonder if it might not be something else that needs checking..
Wish I was there to look at it. But I'm won't be for 3 months. Limited to her reports or have her take it to a mexican repair shop (wince) . Anyway, if anyone has any thoughts , it's appreciated !!
Steve
I've asked her for the machine type and to verify the beep code again, but apart from that, can anybody suggest likely problems APART from the motherboard? I'm prepared to buy her a new board, but since I've seen no reports of these failing, I wonder if it might not be something else that needs checking..
Wish I was there to look at it. But I'm won't be for 3 months. Limited to her reports or have her take it to a mexican repair shop (wince) . Anyway, if anyone has any thoughts , it's appreciated !!
Steve
T42p 14", T61 15", T601F
-
seaweedsl
- Sophomore Member
- Posts: 240
- Joined: Thu Oct 12, 2006 2:06 pm
- Location: Old Mexico & NEW Mexico (US)
Re: X60s dead
Looks like nobody has any other suggestion.
OK, well, it's a new MB then. Nothing else to it and not worth fretting over!
Steve
OK, well, it's a new MB then. Nothing else to it and not worth fretting over!
Steve
T42p 14", T61 15", T601F
Re: X60s dead
See this thread - http://forum.thinkpads.com/viewtopic.php?f=30&t=90116
-
Thinkpad Lover
- BANNED
- Posts: 512
- Joined: Sat May 21, 2011 2:03 am
- Location: The Lion's Den, New York City, NY
Re: X60s dead
Hi Steve,
I just made a post at the thread here: http://forum.thinkpads.com/viewtopic.php?f=30&t=90116
A few observations there might help you. Let's hope for the best,
Daniel
I just made a post at the thread here: http://forum.thinkpads.com/viewtopic.php?f=30&t=90116
A few observations there might help you. Let's hope for the best,
Daniel
Last edited by Thinkpad Lover on Wed Jul 27, 2011 2:29 am, edited 1 time in total.
240, 380Z, 390X, 570E, 600x, 701C("The ButterFly"), 770, A20...22,31, G40,41,
R32,40,50,51,52, R60,61, SL410/510,T20...23,30,40...43, T60p UXGA,T61,T400,
TransNote, X20..24,31,40,X41T,X60,61,X60/61T, Z61t, W500
No PM's please. MY email [tigerinspring1@aol.com]
R32,40,50,51,52, R60,61, SL410/510,T20...23,30,40...43, T60p UXGA,T61,T400,
TransNote, X20..24,31,40,X41T,X60,61,X60/61T, Z61t, W500
No PM's please. MY email [tigerinspring1@aol.com]
-
seaweedsl
- Sophomore Member
- Posts: 240
- Joined: Thu Oct 12, 2006 2:06 pm
- Location: Old Mexico & NEW Mexico (US)
Re: X60s dead
Thanks Harry and Daniel for the excellent tip. I suspect this is the problem. Now, if I can find her somebody that's got the Ram to do the swapping...
Steve
Steve
T42p 14", T61 15", T601F
-
- Similar Topics
- Replies
- Views
- Last post
-
-
accidentally flipped a DOM module - now IDE is dead
by my03 » Sat Feb 21, 2026 8:37 pm » in ThinkPad Legacy Hardware - 3 Replies
- 2597 Views
-
Last post by kishy
Wed Feb 25, 2026 10:58 am
-
-
- 3 Replies
- 1926 Views
-
Last post by TP_
Thu Mar 12, 2026 8:10 am
-
-
Dug my x60s out of storage, it needs a lot of love
by kythri » Sat Feb 07, 2026 7:57 pm » in Thinkpad X60/X61 Series incl. Tablets - 3 Replies
- 3321 Views
-
Last post by Medessec
Mon Mar 02, 2026 1:34 pm
-
Who is online
Users browsing this forum: No registered users and 182 guests




