Hi all.
So my second handed thinkpad w500 with the cat smashed lid and too tight hindges finally cracked a little, and now the domino effect have started.
I love this machine and it's not old enough to be retired yet!!!

http://s15.postimage.org/dhf798jp7/2012 ... _38_55.jpg

http://s15.postimage.org/rvil0z5iz/2012 ... _35_59.jpg

I actually tried gluing it with 2 component epoxy, but there was not enough contact space so it could not hold it.

Anyways, I ordered one of these babies, hope I will have it in denmark in a few weeks:
http://www.ebay.com/itm/New-Lenovo-Thinkpad-T500-W500-LCD-Cover-Lid-42X4811-/180964461256?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D3530742027694372093%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D180964461256%26

I asume it's all I have to change (beside greasing the hindges) to fix the problem?

Any guide on how to change this *****Expletives removed by Moderator*****? (I'm rather good a such things, but a guide to how to do it smartest would be awesome)...

REALLY appreciates it guy's
- Helio

Admin edit: Changed two images to links. Please keep inline images ~50KB AND post a *PIC* note in the subject line. Also, watch your language

Hi.

Sadly that wont fix the problem. You need a whole new Magnesium back plate for the LCD, since its that one that is cracked. This problem is very common on W500 units (i have one that had the problem, one i know had this problem, and i have read about it other places)

So the easiest way is probably to swap the whole assembly

Best regards from Denmark

The Hardware Maintenance Manual is the best resource for disassembling the system. You can find one for the W500 here:

http://download.lenovo.com/ibmdl/pub/pc ... 630_04.pdf

Tak Andreas, sådan noget lort pg lagkage... Men cool at der er danske thinkpad entusiaster herinde også

Thnx guys, I actually bought the backplate, guess I Will have to try to and buy a magnesium frame then, or try to glue it together, any one WHO have experience with the last?

I love this machine, and would hate to see it die already.
-Helio

Jeg tilslutter lige danskerfesten så..


Anyways, my W500 makes some rather disturbing 'cracking-noises' when I touch the upper left side of the display bezel, hasn't cracked open yet though. Did you experience similar stuff with yours before it cracked?

You would need one of these: http://www.ebay.com/itm/New-IBM-T500-W5 ... 19cbd72978

It will cost approx: 1562.26 kr

However you could also try to look at "Guloggratis" og DBA.. i bougt at whole LCD assembly for 310 kr

Hej Cola

Actually, the *****Expletives removed by Moderator***** that promised my machine would be as new, never told me, that his cat have made a serious attack on it, so it was already caking up when I got it, and it just became a domino effect ...

If I where you I would grease the hindges, not something I know anything about, since no thinkpad I have ever had before have ever needed this, - but I'm for sure in hell going to, so this don't happen again ....





Well I'm not going to pay that amount ... but if I could get it for 310 that would be my solution ...

Right now I'm thinking about(looking into) using fiberglass-reinforcement

- Helio

IF it is possible to use the lid from a T61, then i have a dead T61 you might want to buy

Send me a PM if it have an interest!

Hey man sry have first seen your post Boe.
I don't know if it does? But if it do, i would love to buy it....

The magnesium is totalt broken now. Still not ready to give it up!

-helio

Okay I really REALLY want this machine up and running again fast, - so I really needs your guys help

I have ordered the plastic cover, check!

I'm going to order a new magnesium lcd roller cage:
1. WILL this one fit my machine?
http://www.ebay.com/itm/New-IBM-T500-W500-LCD-magnesium-structure-frame-43Y9736-/110794058104

2. Is there anything else I need to repair this animal?

3. The hinge seams to have locked it self into place: how do I fix that?

4. Is there any guides for:
a. how to get the screen off the machine? so I can replace the lcd rollar cage.

b. how to replace the magnesium frame, and plastic cover, while keeping my screen?

I hope you guys can help me out here.
- Helio

Like Ray said.

Brad

Yes thank you, I have looked a bit in it:

But I thought more about user 1 on 1 experiences, with etc. the hindge, and magnesium frame problem ...
I have browsed so many threads now, and my head is getting buzzy, but many ppl seams to have this problems

So mainly I'm thinking:
1. if there is something with the hinge (that seams to have locked itself a bit).
2. The magnesium lcd cage: does the one on ebay look good? and are they really that expensive? is there any other solutions, does a lcd rollorcage from an t61 fit etc?

Again, I really apprciates it:
I'm browsing both the pdf and the video guide right now

Thnx again...
A confused and a bit frustrated Helio, who just really want his machine back in order again
EDIT: LCD front bezel (LCD cover kit) - got it (searched to far down the page) I think I'm onto how to disasembly the LCD, and everything in it now ... so the two above questions seams to be it.... *****Expletives removed by Moderator***** I hope I can do this :d

Okay ... I ended up ordering one of these from China:
[url]http://www.ebay.com/itm/New-Orig-IBM-Lenovo-T500-W500-15-4-LCD-magnesium-structure-frame-43Y9736-42X4793-/121041021630?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D4825796385304395439%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D121041021630%26[url]

So now I just hope it fits ... and that I can get it asembled

I found this really nice video for how to disasemble the screen, seams allot easier than I exepexted:

[url][/url]http://www.youtube.com/watch?v=szgDVsj5LsI[url][/url]

Considering ordering a set of new hinges also ...

- Hellio