Thanks a million! Reinstalling the the chipset drivers seems to have done the trick!

hugs!!

Hi, My x201t's integrated camera suddenly stopped working. In device manager it shows under USB controllers: "Unknown Device". On the properties for that item, it says "Windows has stopped this device because it has reported problems. (Code 43)". I tried uninstalling the driver, scanning for new HW,...

Here's a random suggestion: look at the bluetooth utility. Really. A few years ago I ran into a problem where hitting caps lock would pop up a little message on the bottom right of the screen (above the normal windows icons) which would STEAL THE FOCUS. [censored] me off to no end until I tracked it...

If you have a Clear account and are getting the splash page you should be able to click the "Existing Customer" link. (You may have to click another login link in the upper right hand corner of the page first.) Then you can login and switch the MAC address to your 6250 card. They say you have to ca...

thinkpod : Good hear all is well and you have a working WiMax connection - What speeds are you experiencing? Ha, well it looks like "a happy ending" was mentioned too soon. My Clear account doesn't seem to be set up right - I'm seem to be stuck at the startup screen. Sigh, ok off to call Clear. If ...

Ok, the adventure continues! After lots of googling about the 6250, I realized that I was missing the "WIMAX Connection Utility" from Intel, which by screen shots seemed like it could check my HW and see if it was functioning. I tried uninstalling and reinstalling several versions of the drivers fro...

visionviper wrote:Is WIMAX enabled in the BIOS?

Yes. As far as I could see, there was only one option "Wireless LAN and WIMAX radios".

Thanks for the encouragement. Got the 6250, replaced my 6300 following the HMM. You are correct that the 6250 only has two antennas. The 6250 showed in device manager no problem Lenovo System Update didn't find it, so I manually downloaded and installed the drivers from Lenovo (installed both WIFI a...

Since no one seems to know, I guess I'm going to just have to try it and find out

Will report back with results...

Hi,

I have an Intel 6300 in my X201t, and want to get WiMAX for Sprint.
Can I just buy replace it with a 6250 (FRU 60Y3195)?
Do I need any other parts (antennas?)?

Thanks!

Hi, I'd like to get a T410s (with discrete NV graphics) that is capable of Intel VT. As far as I understand, not all Thinkpads have this enabled? And the only way to know if a thinkpad supports it is to get one that is labelled vPro? However, when selecting/configuring a T410s on the website, there'...

Ok, they replaced my motherboard yesterday and... it still blue-screens

So either the HW is randomly flawed and I'm 0/2, or the T60p's are systematically flawed.

At this point, I'm at a loss for what to do, other than return the laptop. Any ideas?

2613-HQU.

I tried reseating the ram several times to no avail. Currently wiping to factory now...

Yeah, I just don't have them with me, but I should be able to get to them tomorrow.

I'm just tired of my HW being flaky and want to get things resolved asap...

Sorry, didn't know about the new rule... I've got a T60p (with the [censored] NMI parity problem), but I don't have my recorvery discs handy. I made a set from the factory install, then installed XP clean from disc, so I don't have R&R installed to make a new set. I should be able to put my hands on...

Kyocera wrote:Turn off the machine, wait a few seconds, restart and press F11.

Thanks, but didn't work - booted windows.

The partition is still there (can see it in disk management), and I don't think I did anything evil to it. Though maybe client security does?

I'm at a loss

Hi, I searched and couldn't find an answer here, but sorry if this has been asked before. I want to wipe my machine back to factory settings, but when I hit the thinkvantage button on boot, it takes me to the "Startup Interrupt Menu" instead of the predesktop interface, and I can't seem to get to th...

I tried BIOS 2.03, no change. I haven't tried 2.01, but it doesn't seem to be available for download

I'm about to wipe the system to factory as the last thing I do before calling support...

I ordered on Nov 4, got it maybe a 1.5 weeks later...

New BIOS didn't help.

The original 512MB that came with my machine had the same problem. The 2G I have now isn't IBM, but memtest etc have no problem with it.

Hmm, well, I've got on-site service, so I guess it's time to make them work for me...

Heya, there's a couple of other similar threads here: http://forum.thinkpads.com/viewtopic.php?t=33422 http://forum.thinkpads.com/viewtopic.php?t=33457 I've got a T60p with similar problems - but 100% correlates with being on battery power. I've got 2GB pc5300 ram, but it had the same problem with t...

New bios didn't help me.

Neither did using ATI drivers

I guess I'm left with Lenovo support - youch...

Hey Peter, I have the exact same problem - it took me a while to realize the correlation with batter power, but it's 100% - my system is rock solid on AC. I thought it might be powerplay, but turning that off didn't solve it. FYI, I'm running IBM display drivers on a clean (non-IBM) XP Pro install. ...

Ooh, thanks!!! Doing it by eye with the Adobe Gamma control panel got me 90% happy. And by looking at a non-dithered zoomed grey scale while adjusting, I've answered my own question - all this adjustment happens on the analog side, so you don't loose any color accuracy. whew. But now that I'm lookin...

Do you have Adobe Photoshop? Or better yet some hardware calibrator like a Huey or an Eye-One or a Spyder? Yes, I've got Photoshop. Does that have some color calibration mode? So, here's a deeper question. Say I adjust the color controls in Catalyst Control. Where is the adjustment made? In the (8b...

Ok, I just got my T60p (2613HQU) and love it so far. (replacing a T41p). Except my LCD color is off - I have a TMD display (13N7063) (see http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62784). I've tried tweaking the colors in ATI Catalyst Control panel, but I c...

My T41p fails to go into standby even though I have the MaxiMiser setting for "System standby" set to 1 minute. The system will standby fine with Fn-F4...

Any ideas?

Hey all, (I just got my t41p from Bill, and it rocks.) I ordered a set of recovery CD's for my T41p 2373GEU and IBM sent me CD's that say thay are for "Thinkpad T40, T40p Type 2373, 2374" and "3/15/2003" and "P/N 01R8066." I can't find any info on whether these are the right CD's for me, but my gut ...

JaimitoBond wrote: FireGL is also a M10. My mistake - you sir, are correct. fox_napier wrote: Is M11 the Radeon 9700? Yes. fox_napier wrote: But then I'm wondering if both have OpenGL support, what's the point of marketing them differently? Is the 9600's OpenGL support faster but less stable? Conver...

fox_napier wrote: and additional registers being used for OpenGL rendering but 20% less battery life just to have 64 MB and OpenGL hardware support is a toss-up. (unless of course you use software like Photoshop and Solidworks on a regular basis) I don't mean to be an [censored], but I don't think t...