Why not use VGA to DP to one monitor, then the DP plug to the other monitor?

Hello,

How can I achieve 2 external monitors 1920 x 1080 resolution each with Display ports Cable in X220? (no vga)

Will this config be possible on dual external monitors 2560 x 1600 each? Wouldn't it be to much for the processor/video card?

Most smartphones and mine for sure need those bridged.

http://www.youtube.com/watch?v=9LZt4pW97P8

czatlantis wrote:Try to connect you USB cable only half way in your notebook. Power pins are connected earlier because they are longer (take a look on USB cable) so pins 2+3 remain unconnected(open)

did that, still doesn't charge ok. I believe it's drawing little current from the PC.

czatlantis wrote:Try to connect you USB cable only half way in your notebook. Power pins are connected earlier because they are longer (take a look on USB cable) so pins 2+3 remain unconnected(open)

how smart you are man...

It really depends on what your device needs. Mine needs 2+3 shorted. Apple products need some resistor divider and maybe yours need those pins open. Check your original charger My original charger has only 2 pins. So means others should be opened right? Also, Why micro usb has 5 pins instead of 4?!...

These cables are useless - modern USB ports in computer can deliver uasily 1.5A but you have to tell your device to draw more current. For example HTC cellphones detects AC charger by shorting data pins. From PC it charges only 400mA, from AC charger 700mA. I made myself two USB ports (male+female)...

It is getting energy, but not charging properly. I believe this is because pin 2 and 3 should be open.

When plugging, windows alert: USB not recognized, therefore it doesn't charges correctly. Because I think it needs to cut pin 3 and 4 cables.

It's an LG P500 one.

Thanks man.

But it seems that pin 2 and pin 3 should be opened. How to do that with software?

I want an output of 5V in pin 1 and 4 to charge my cellphone, just like a charger.


I imagine that there should be a driver to do this. (my phone does not have it).

So a driver to force the USB A plug from the computer to output that voltage, Has anybody heard of something like that?

Why as real as it gets?

It has an UART... device that I have has UART too. so this is real serial, right?

because express card has more than 4 pins as USB does...

Hello,

Looking for Native Serial RS-232 for my W7x64 X220. Tired of the RS-232 to USB connector.

How this sounds?

http://intrl.startech.com/Cards-Adapter ... RT~EC1S952

Hello,

I posted this in the past:
http://forum.thinkpads.com/viewtopic.php?f=29&t=93616

I think I've found the solution, two screws of the cd reader had unscrewed, so when I moved the t61, it would immediately shut down. Disassambled the cd unit, screw the screws, and now seems ok.

Nope. Not always when moved it shut downs. It's correlated with high temperatures I think...

ok, I've blowed what was left of the dust. Speed fan tells me that Core temperatur is 140°F. Is that too much?

Yes, remove all that dust. Get a can of compressed air if available, remove the keyboard, hold a toothpick between the blades of the CPU fan to stop it from turning, then blow out all the dust from the CPU cooler. You may even want to remove the keyboard bezel and clean the whole area. Thank you. O...

Hello Sirs, My T61p, was working perfectly, now it's erratic. Sometimes when I shake or move the notebook, its shutdowns completely and instantly, and it won't start again. I have to take the battery off, put it back again, several times to make it start. Like I said is very erratic. I have updated ...

Wow! Are all the guys in Russia so smart? It does solve the problem. I created a batch file that runs on startup. However there is still something wrong with the bluetooth support, the led is off when booting windows xp. It's indirectly fixed, but I there must be something in the registry that shutd...

Hello,

I have a Thinkpad T61p, each time I start or reboot, the bluetooth led is turned off. I have to press Fn + F5 (hot key utility) to reactive it.

I want to be always enable. Any ideas?

I think the registry must be modified in order to acomplish this.