system board for 600X
Posted: Sun May 08, 2005 9:56 am
As header, please e-mail me if you have one. Price?
Which model 600X Dennis? The non-Speedstep MBs are cheaper than the later Speedstep units.
Regards,
James
Thinkpads Forum
Est. 1995 - Copyright © 1995-2017 (see FAQ for details)
https://forum.thinkpads.com/
system board for 600X
Page 1 of 1
Posted: Sun May 08, 2005 10:00 am
600X system board
Posted: Sun May 08, 2005 4:35 pm
2645-4EG 500mhz P3
600X SystemBoard
Posted: Thu Jun 30, 2005 9:28 am
I have such a board that I bought mistakenly thinking that I could convert my
'E'.....but alas, no such feat was possible!!!
The seller advertized it as like new.....guaranteeing no DOA.
I paid $100.00 for it. I will swap it straight accross for a good 600'E' SystemBoard....that test out perfect. My 600'E' that I bought from Bill has
been giving me bad meaage for some time now....I need the 400Mhz one...
A J A
'E'.....but alas, no such feat was possible!!!
The seller advertized it as like new.....guaranteeing no DOA.
I paid $100.00 for it. I will swap it straight accross for a good 600'E' SystemBoard....that test out perfect. My 600'E' that I bought from Bill has
been giving me bad meaage for some time now....I need the 400Mhz one...
A J A
Posted: Thu Jun 30, 2005 9:52 am
AJ,
What kind of error messages have you been seeing on your 600E?
It's very rare for one to need a new motherboard, they generally either work or they don't.
Regards,
James
What kind of error messages have you been seeing on your 600E?
It's very rare for one to need a new motherboard, they generally either work or they don't.
Regards,
James
Error Message
Posted: Thu Jun 30, 2005 10:08 am
Hi JHEM: I will get the message off the easytest when I go home and send it to you tomorrow.....'preciate it...
A J A
A J A
waiting
Posted: Mon Jul 18, 2005 8:40 am
James: Are you deceased???/ Where are yopu buried??? I'll send some roses...
A J A
A J A
Re: waiting
Posted: Mon Jul 18, 2005 10:17 am
Here I was thinking the same thing about you! I was dead for a few weeks for tax purposes.1stallthewayaj wrote:James: Are you deceased???/ Where are yopu buried??? I'll send some roses...
Where's the EZTest error codes you were going to post?
Regards,
James
Error Code
Posted: Tue Jul 19, 2005 9:27 am
Hi James....glad to see you still alive.....I wont have to spend any money now on roses...
The Codes are as follows:
DEV 001
ERR 91
FRU 3610
'Preciate it
A J A
The Codes are as follows:
DEV 001
ERR 91
FRU 3610
'Preciate it
A J A
Re: Error Code
Posted: Tue Jul 19, 2005 4:36 pm
Pull the battery and CD drive, retest and report.1stallthewayaj wrote:The Codes are as follows:
DEV 001
ERR 91
FRU 3610
Regards,
James
Error Code
Posted: Wed Jul 20, 2005 8:41 am
Hi James:
The battery is already out, and has been.
I will try it tho, without the CD Drive in it., as well as
the batt...
Will report tomorrow, the public computer I use is on limitted
time.....
"preciate it...
A J A
The battery is already out, and has been.
I will try it tho, without the CD Drive in it., as well as
the batt...
Will report tomorrow, the public computer I use is on limitted
time.....
"preciate it...
A J A
Easytest results
Posted: Thu Jul 21, 2005 9:42 am
Hi James:
Okay, you were right. It tests out okay w/o CD and Batt.
Where do we go from here???
Pass on to Bill my apologies for having thought of changing my original
feedback opinion of him and his bargains....
We did start out with problems over the W/2000 OS, but Bill was generous
enuff to send me an original OS Restore Disk for W98, and didnt charge me for it....everything else is fine....
A J A
Okay, you were right. It tests out okay w/o CD and Batt.
Where do we go from here???
Pass on to Bill my apologies for having thought of changing my original
feedback opinion of him and his bargains....
We did start out with problems over the W/2000 OS, but Bill was generous
enuff to send me an original OS Restore Disk for W98, and didnt charge me for it....everything else is fine....
A J A
Posted: Thu Jul 21, 2005 10:27 am
AJ,
You need a new CD/DVD drive.
Regards,
James
You need a new CD/DVD drive.
Regards,
James
New CD/DVD Drive
Posted: Fri Jul 22, 2005 9:24 am
When I test the CD in the easytest mode, it tests out OK....
So where do we go from here???
'Preciate it...
A J A
So where do we go from here???
'Preciate it...
A J A
Posted: Fri Jul 22, 2005 9:00 pm
think about it... what would you say if someone asked you "are you dead?"
OK, now back on topic
OK, now back on topic
Error Messages
Posted: Sat Jul 23, 2005 11:09 am
Hi James:
I did some further testing with the following results...
With Brand new Batt in machine and usual CD: NO ERROR MESSAGE
With Empty Batt Box I made up to fill space when not using new Batt: ERROR
MESSSSAGE pertaining to System Board...
COMPLETE TEST with new batt, and CD:: NO ERROR MESSAGES OF ANY KIND, Machine checks out perfect.
'Preciate It...
A J A
I did some further testing with the following results...
With Brand new Batt in machine and usual CD: NO ERROR MESSAGE
With Empty Batt Box I made up to fill space when not using new Batt: ERROR
MESSSSAGE pertaining to System Board...
COMPLETE TEST with new batt, and CD:: NO ERROR MESSAGES OF ANY KIND, Machine checks out perfect.
'Preciate It...
A J A