Sold! T61 bottom and T60 mobo
Posted: Tue Jan 21, 2014 6:50 am
I did a 'cheap' T601 Frankie during Fall of 2013, I'm now left with a few extra parts...
Originally I was going to toss the parts together, hoping it'll all fit, but it would probably fetch me something lower than expected or raise a return.
I know I have no reputation here, I won't take offense if no one decides to buy.
Oh and if I did anything wrong with this post feedback about it would be appreciated.
ATI Radeon X1400 T60 mobo &T2500 CPU - $20
14" 4:3 T61 bottom chassis w/ 2 port USB palmrest & keyboard bezel - 10
14" 4:3 SXGA+ screen & frame - $40 sold
edit: Sorry no international shipping. I don't know of the headaches it would bring me.
The T60 board works fine before I did the swap. I'm not the original owner, but I took modest care of it, worked fine while in use.
The bottom half has its rubber feet, few scratches, palmrest is in ok condition 7/10, no cracks in it.
The keyboard bezel is actually from a T60, I cut part of the vents above the heat sink fan because they were smaller than the original T61.
I can supply the original, but it has damaged plastic, as if it was melted above Printscreen to Page up keys.
The SXGA+ screen is in great condition. When I had gotten the T61 it seemed to be taken care of well before.
The only drawback was that there was damage on the back from a pesky sticker removal. Wear and tear as well
I have a link here, big image; 3000x2000
Originally I was going to toss the parts together, hoping it'll all fit, but it would probably fetch me something lower than expected or raise a return.
I know I have no reputation here, I won't take offense if no one decides to buy.
Oh and if I did anything wrong with this post feedback about it would be appreciated.
ATI Radeon X1400 T60 mobo &T2500 CPU - $20
14" 4:3 T61 bottom chassis w/ 2 port USB palmrest & keyboard bezel - 10
14" 4:3 SXGA+ screen & frame - $40 sold
edit: Sorry no international shipping. I don't know of the headaches it would bring me.
The T60 board works fine before I did the swap. I'm not the original owner, but I took modest care of it, worked fine while in use.
The bottom half has its rubber feet, few scratches, palmrest is in ok condition 7/10, no cracks in it.
The keyboard bezel is actually from a T60, I cut part of the vents above the heat sink fan because they were smaller than the original T61.
I can supply the original, but it has damaged plastic, as if it was melted above Printscreen to Page up keys.
The SXGA+ screen is in great condition. When I had gotten the T61 it seemed to be taken care of well before.
The only drawback was that there was damage on the back from a pesky sticker removal. Wear and tear as well
I have a link here, big image; 3000x2000