FS/Feeler: QX9300 FP, Q9100 T61, 14.1 T61p, 2010 T61p mobo
Posted: Sat Dec 20, 2014 5:55 pm
First is my "Frankenpad" - a 14.1" T60p, with a 15.4" T61p.
The current board is a PRE 08/08 board, with all modifications necessary for a QuadCore.
Specifications:
14.1" 1400x1050 resolution
1x2GB DDR2 RAM, 1x4 GB DDR2 RAM (total at 6 GB)
nVidia Quadro FX570m - 256MB.
Intel Core2Quad QX9300 @2.53 GHz
64 GB SSD, SATA II
OS: Windows 8 64 Bit can be installed. With activation key.
Condition is good. Very Little play in the hinges (no worth to mention), and overall a good looking machine.
The motherboard is a replacement board - it have never been abused, and i have only used it for a short time. Heavy loads have been on my eGPU. NO signs on a pending nVidia failure.
My asking Price is: 1000$
Second is a T61 15.4" with Intel GFX and a Q9100
Specifications:
1280x800 resolution
2x2 GB DDR2 RAM
Intel GFX
Intel Core2Quad Q9100 (One pin is broken off, repaired with a copper piece)
150 GB HDD, @5400
OS: Windows XP sticker. Can install any OS, but you must have a license
Condition: The condition is fine. The hinges are a Little Loose (1 cm of play), and there are some scracthes on the top of the lid.
My asking Price is: 250$
Other than that i have a very rare 2010 15.4" T61p motherboard, modded to support 1066MHz CPUs. There is a Intel Core2Duo P8700 with it. Works just fine. Have been overclocked (NO voltage increase) a Little, but not for longer durations. Temperatures have been monitored....
My asking Price: I don't have an asking Price since i just want to have a feeler about the Price... Im not just letting this one off.
I also have a 14.1" T61p, that i am willing to mod to support QuadCore or 1066MHz CPUs for those who migth want to build a really, really, scary frankenpad (I am the 2. owner of the laptop. It have never been abused or anything like that either no pending GPU failure).
My asking Price: 250$ OUT!!!
________________________________________________________________
Why am i selling these machines?
I have too many laptops when i am going to move in half a year - so i migth as well begin to sell them now
Where are the machines located:
Near Aalborg, Denmark
Will i ship?
Yep. Buyer pays, and buyer takes the responsebility. But we agree on the packaging and shipping method first
________________________________________________________________
You are welcome to bid, or comment on the Price if you want to. I migth readjust - but i think those prices are fair
Best regards
Andreas
The current board is a PRE 08/08 board, with all modifications necessary for a QuadCore.
Specifications:
14.1" 1400x1050 resolution
1x2GB DDR2 RAM, 1x4 GB DDR2 RAM (total at 6 GB)
nVidia Quadro FX570m - 256MB.
Intel Core2Quad QX9300 @2.53 GHz
64 GB SSD, SATA II
OS: Windows 8 64 Bit can be installed. With activation key.
Condition is good. Very Little play in the hinges (no worth to mention), and overall a good looking machine.
The motherboard is a replacement board - it have never been abused, and i have only used it for a short time. Heavy loads have been on my eGPU. NO signs on a pending nVidia failure.
My asking Price is: 1000$
Second is a T61 15.4" with Intel GFX and a Q9100
Specifications:
1280x800 resolution
2x2 GB DDR2 RAM
Intel GFX
Intel Core2Quad Q9100 (One pin is broken off, repaired with a copper piece)
150 GB HDD, @5400
OS: Windows XP sticker. Can install any OS, but you must have a license
Condition: The condition is fine. The hinges are a Little Loose (1 cm of play), and there are some scracthes on the top of the lid.
My asking Price is: 250$
Other than that i have a very rare 2010 15.4" T61p motherboard, modded to support 1066MHz CPUs. There is a Intel Core2Duo P8700 with it. Works just fine. Have been overclocked (NO voltage increase) a Little, but not for longer durations. Temperatures have been monitored....
My asking Price: I don't have an asking Price since i just want to have a feeler about the Price... Im not just letting this one off.
I also have a 14.1" T61p, that i am willing to mod to support QuadCore or 1066MHz CPUs for those who migth want to build a really, really, scary frankenpad (I am the 2. owner of the laptop. It have never been abused or anything like that either no pending GPU failure).
My asking Price: 250$ OUT!!!
________________________________________________________________
Why am i selling these machines?
I have too many laptops when i am going to move in half a year - so i migth as well begin to sell them now
Where are the machines located:
Near Aalborg, Denmark
Will i ship?
Yep. Buyer pays, and buyer takes the responsebility. But we agree on the packaging and shipping method first
________________________________________________________________
You are welcome to bid, or comment on the Price if you want to. I migth readjust - but i think those prices are fair
Best regards
Andreas