Sold: Three cruddy T60s
Posted: Fri Jan 16, 2015 12:11 pm
I have three barebones T60s that I just don't have the time to toy with at the moment, and I'm pretty sure someone on here can find better use for.
I'll post some pictures if I get the time, but I'll make it a priority if someone expresses interest. Each one will NOT include a battery, HDD, HDD caddy, and a charger. Only two have HDD doors, I'd rather not include them seeing as some ebay kits include HDD doors anyway for really cheap, but if you need one... let me know, I'll include it. I am also removing RAM from these machines to start off, but I have a few cruddy 512MB RAM sticks to include if you want me to install them before shipping. It's all I have to include, not very suitable if you intend to use the T60 for actual work or use. I don't think any of these are SXGA+ screens. Each one does have at least a DVD/CD-RW drive.
Type 1953-DDU - $20
An Intel-GPU machine with a T5500. In reasonably good condition with a bit of wear, and works just fine. Been using with my 2503 Dock's ATI GPU up until I got my cheaper Intel-GPU Frankenpad working.
Type 2007-B28 - $30
Has a T7200, and an X1400 ATI GPU. Boots up just fine. Fan makes a tiny bit of noise, more than I'd like, but it's not rattle-y and doesn't affect cooling.
Type 2007-V41 - $20
Has a T7200, and it does have the "p" board(V5200 FireGL). However- this laptop has given me the most hassle in particular, I've had it for nearly 2 years now in my back pile gathering the most dust at intervals. The fan is very noisy, and I'm not sure if it's the mobo or if it's the cage at the HDD seat, but the laptop has a particularly hard time reading HDDs. The casing has an indentation just beneath the HDD seat on the bottom casing on the rubber foot there, so it's likely an issue with the cage or the casing, not the motherboard, which other than that works perfectly fine. The screen also started yellowing in the past year.
If you weren't already aware from the Type no.s, these are all 14" machines. Shipping is separate from these prices in case someone wants more than one- I can obviously combine the shipping to save cost on both ends.
If you have any questions, you can post them on here. If you are expressing actual interest in buying a unit, PM me.
I'll post some pictures if I get the time, but I'll make it a priority if someone expresses interest. Each one will NOT include a battery, HDD, HDD caddy, and a charger. Only two have HDD doors, I'd rather not include them seeing as some ebay kits include HDD doors anyway for really cheap, but if you need one... let me know, I'll include it. I am also removing RAM from these machines to start off, but I have a few cruddy 512MB RAM sticks to include if you want me to install them before shipping. It's all I have to include, not very suitable if you intend to use the T60 for actual work or use. I don't think any of these are SXGA+ screens. Each one does have at least a DVD/CD-RW drive.
Type 1953-DDU - $20
An Intel-GPU machine with a T5500. In reasonably good condition with a bit of wear, and works just fine. Been using with my 2503 Dock's ATI GPU up until I got my cheaper Intel-GPU Frankenpad working.
Type 2007-B28 - $30
Has a T7200, and an X1400 ATI GPU. Boots up just fine. Fan makes a tiny bit of noise, more than I'd like, but it's not rattle-y and doesn't affect cooling.
Type 2007-V41 - $20
Has a T7200, and it does have the "p" board(V5200 FireGL). However- this laptop has given me the most hassle in particular, I've had it for nearly 2 years now in my back pile gathering the most dust at intervals. The fan is very noisy, and I'm not sure if it's the mobo or if it's the cage at the HDD seat, but the laptop has a particularly hard time reading HDDs. The casing has an indentation just beneath the HDD seat on the bottom casing on the rubber foot there, so it's likely an issue with the cage or the casing, not the motherboard, which other than that works perfectly fine. The screen also started yellowing in the past year.
If you weren't already aware from the Type no.s, these are all 14" machines. Shipping is separate from these prices in case someone wants more than one- I can obviously combine the shipping to save cost on both ends.
If you have any questions, you can post them on here. If you are expressing actual interest in buying a unit, PM me.