ON HOLD: my personal X60 tablet, SXGA+ (1400x1050) LCD, the nicest one you'll find

[ajkula66]

I love this little guy...but it hasn't been turned on in more than six months, and definitely deserves better than that...

the basics:

ThinkPad X60T (6363-2AU)

L2400(1.66GHz)
1GB RAM..........................................now 3GB
80GB 5400rpm HD..............................now Intel 160GB SSD
12.1in 1400x1050 LCD
Intel 950
Intel 802.11abg wireless.......................now Atheros AR9380 (450Mbps on my dual-band router)
Bluetooth, Modem
1Gb Ethernet
Secure chip
Fingerprint reader
8c Li-Ion*.........................................please read below
WinXP Tablet 2005..............................COA only
Modded BIOS
No Ultrabase
No stylus or AC adapter included


Likely one of the finest surviving X60T units that you'll ever come across, showing only minor wear on the lid and bottom. Plastics and keyboard are in *very* clean shape, with all the stickers still intact.Overall condition is 9 out of 10 in my opinion.Apart from the upgrades listed above, let me just note a couple of other things:

- The coveted SXGA+ screen is in perfect condition. No scratches, dead pixels, pressure marks and still very bright for its age and type.

- The heatsink has been replaced with a brand new one when I got the system, and the machine has seen maybe 30 hours of use since then. It runs very cool and quiet.

- The battery has been sourced from a re-celler all the way in the UK, courtesy of a friend of mine and a fellow forum member. It shows the manufacturing date of 2017-05-12 - the date when the new cells were installed - while correctly pointing out that it was first used in August of 2007, and holds 100% of the design charge with under 10 cycles.

- The machine gives out a Computrace warning when the BIOS is entered, but there is NO active Computrace on this system


Asking $200 shipped within U.S. or $175 + shipping at cost to most locations worldwide.

PM or email me directly to tataslonATaol.com with any questions/concerns.

[arty_harvy]

Pmed and E-Mailed

[olex126]

George....George....George!

I believe it was ME sold you that re-celled battery.....and I am NOT in the U.K....

I'm in Canada...you remember Canada don't you ?...Snow....Cold....Ice....Igloos...Moose....Eskimos....Banff National Park.... Newfoundland Screech....Air Canada....The North Pole.... Santa Claus....RCMP in red suits and funny furry hats...a Prime Minister with no backbone...(whoops! Sorry!..sometimes my "Bad Inside Voice" just accidentally gets outside )

How DARE you forget?

HARUMPH!

Regards.

Dave

[ajkula66]

George....George....George!

I believe it was ME sold you that re-celled battery.....and I am NOT in the U.K....

You are not, but the re-celler is, correct ?

Always good to hear your comments, old friend...

[iamdmc]

George....George....George!

I believe it was ME sold you that re-celled battery.....and I am NOT in the U.K....

I'm in Canada...you remember Canada don't you ?...Snow....Cold....Ice....Igloos...Moose....Eskimos....Banff National Park.... Newfoundland Screech....Air Canada....The North Pole.... Santa Claus....RCMP in red suits and funny furry hats...a Prime Minister with no backbone...(whoops! Sorry!..sometimes my "Bad Inside Voice" just accidentally gets outside )

How DARE you forget?

HARUMPH!

Regards.

Dave

I should move back to TORONTO so I could buy recelled batteries from you for my X61

but sadly I moved to LONDON and won't be back for a year at least

[iamdmc]

Any de-lamination in the panel&glass?

Could this work with the X61T boards? If so I might be interested as I could do pinmod on an L7500 X61T board with this

[ajkula66]

Any de-lamination in the panel&glass?

No.

Could this work with the X61T boards? If so I might be interested as I could do pinmod on an L7500 X61T board with this

Yes, those are usually referred to as X601...

That being said, the machine is currently on hold pending payment.