Page 1 of 1

WTB T2x parts; 1.2Ghz PPGA PIIIm, more

Posted: Fri Jan 20, 2006 3:54 pm
by PrincipalValiant
Hey guys,

I know some of you must have T2x series parts lying around. I'm looking for a working 1200 or 1266mhz 478 pin Pentium IIIm for my T23. I had a brand new in box one pending on ebay but the seller seems to have disappeared. I'd much rather buy from you guys anyways.


As you can see in my signature I'm also looking for the optional drive screws and an sxga screen that is in good condition. Maybe a brand new in box keyboard too. If you have a cache of stuff you want to get rid of PM me and lets work something out.

I'm not looking for ram or hard drives

Posted: Sun Jan 22, 2006 12:43 am
by draco2527
clarify, "optional drive screws" (I have a TON of TP screws..both new and used)

Posted: Sun Jan 22, 2006 5:23 pm
by PrincipalValiant
There are two, one which holds the hard disk casing with the IR port and audio jacks in place and one which holds the ultrabay disk in place. You'll notice empty holes for these on the bottom of m ost T2x series I think. I nearly got my hands on these but apparently the ones for the T30 are too long for the T23.

I'll try to look up the part number.

Posted: Sun Jan 22, 2006 5:46 pm
by carbon_unit
The only thing the ultrabay screw does is keep you from using the release mechanism, a low security device. It will work fine without it. I believe it does not even come installed new, it is in a bag and it's use is optional.
The hard drive screw should be installed.

Posted: Sun Jan 22, 2006 6:06 pm
by PrincipalValiant
Yeah, the main reason I want them is because with reasonable force you can pull out the hard disk thing, the maintenance manual just refers to it as a "security screw" within the "screw kit" under #26P9654

Posted: Mon Jan 30, 2006 7:47 am
by PrincipalValiant
I'm very interested in these parts, no one has any of them?