FS: Working i1400 for Parts or Project
Posted: Thu Jul 20, 2006 12:34 am
I'm putting this 2621-420 with issues up For Sale. Everything works except as listed below:
* The A/C connector on the Motherboard has at least one "cold solder" joint and it needs to be fixed. It works if you wiggle it a little until the power light comes on and then make sure nothing moves! It can be repaired by resoldering. I've done it once 2 years ago... I just don't want to do it again!
* TrackPoint is out. The part of the keyboard cable that goes to the TrackPoint is torn and so it or the KB needs to be replaced. The machine works fine with a mouse.
Other than the above, it's a fully functional computer with all drives working, no problems with the screen, includes 1 under year old battery, and proper A/C adapter. I'd prefer to sell the machine without HDD and RAM, but will negotiate for that with interested parties.
General Specs are as follows:
Celeron 466, 13" HPA Screen, 1 USB, VGA, Parallel, Serial, PS2, 2 PCMCIA, and Modem, Externally controllable CD player, CD-ROM, FDD, 2 Accessible RAM slots
Please let me know if you have any questions. I'll consider most any reasonable offer.
* The A/C connector on the Motherboard has at least one "cold solder" joint and it needs to be fixed. It works if you wiggle it a little until the power light comes on and then make sure nothing moves! It can be repaired by resoldering. I've done it once 2 years ago... I just don't want to do it again!
* TrackPoint is out. The part of the keyboard cable that goes to the TrackPoint is torn and so it or the KB needs to be replaced. The machine works fine with a mouse.
Other than the above, it's a fully functional computer with all drives working, no problems with the screen, includes 1 under year old battery, and proper A/C adapter. I'd prefer to sell the machine without HDD and RAM, but will negotiate for that with interested parties.
General Specs are as follows:
Celeron 466, 13" HPA Screen, 1 USB, VGA, Parallel, Serial, PS2, 2 PCMCIA, and Modem, Externally controllable CD player, CD-ROM, FDD, 2 Accessible RAM slots
Please let me know if you have any questions. I'll consider most any reasonable offer.