LF: R51 parts ( lcd frame bezel )

Message

basscleff · #1 Post by **basscleff** » Sun Aug 13, 2006 12:17 pm

I need some R51 parts (2883):
front lcd bezel (frame)
Battery - 6 cell 4.4 aH Sanyo (08K8193) Sony (92P1011)
new\used, either is fine)

thx

basscleff · #2 Post by **basscleff** » Tue Aug 22, 2006 7:41 pm

updated

Website · #3 Post by **tfflivemb2** » Tue Aug 22, 2006 7:48 pm

Brent has 2 sticks of 512mb PC2700 ram for $30 each...highly recommended.

If you want smaller, I might have a stick or two of 256mb PC2700/2100.

basscleff · #4 Post by **basscleff** » Fri Sep 08, 2006 7:42 pm

still looking for these parts

basscleff · #5 Post by **basscleff** » Thu Sep 28, 2006 1:03 pm

still searching for these parts....

Website · #6 Post by **tfflivemb2** » Thu Sep 28, 2006 1:13 pm

Will this work for the LCD?

basscleff · #7 Post by **basscleff** » Thu Sep 28, 2006 1:48 pm

hi there, it doesn't list it in the IBM R51 hmm.
I need:

- 14.1" XGA

Samsung - 11P8352
Hydis - 92P6745

I believe some T4x are compatible.
Too bad, your link was spot on, price was good too.
I just can't bring myself to spend $175 +++

thx!

bontistic · #8 Post by **bontistic** » Thu Sep 28, 2006 2:05 pm

Hi,

I might have a solution but only if you're willing to switch to 15" ?

R52 Shell
15" SXGA+
6 Cell Battery - barely used

You basically just slap in your 14" m/b and you're good to go

PM me if you're interested

Thanks,

Mike

basscleff · #9 Post by **basscleff** » Mon Oct 02, 2006 10:36 am

still would love to find a lcd for this...
part numbers:

LCD panel, 14.1-in. XGA
Samsung - 11P8352

LCD panel, 14.1-in. XGA
HYDIS - 92P6745

basscleff · #10 Post by **basscleff** » Thu Oct 05, 2006 12:59 pm

basscleff · #11 Post by **basscleff** » Wed Oct 25, 2006 12:21 am

still need a screen, and the lcd bezel

basscleff · #12 Post by **basscleff** » Mon Nov 06, 2006 8:41 am

still looking for FRU:
LCD panel, 14.1-in. XGA

Samsung - 11P8352
HYDIS - 92P6745

Website · #13 Post by **tfflivemb2** » Mon Nov 06, 2006 12:40 pm

Have you tried the LCD from the R31? They are both XGA 14.1", correct?

basscleff · #14 Post by **basscleff** » Mon Nov 06, 2006 9:12 pm

will try it once my parts machine arrives

I also have a nice HP N6000c that needs same size..and same connector... so ultimately, I need a few of the same lcd's

Website · #15 Post by **tfflivemb2** » Mon Nov 06, 2006 9:30 pm

Hopefully, you will find that you are not as limited as you think that you are, in finding a replacement LCD.

basscleff · #16 Post by **basscleff** » Mon Nov 06, 2006 9:38 pm

very true.

basscleff · #17 Post by **basscleff** » Sat Jan 06, 2007 2:01 pm

still need front bezel