Page 1 of 1
LF: R51 parts ( lcd frame bezel )
Posted: Sun Aug 13, 2006 12:17 pm
by basscleff
I need some R51 parts (2883):
front lcd bezel (frame)
Battery - 6 cell 4.4 aH Sanyo (08K8193) Sony (92P1011)
new\used, either is fine)
thx
updated
Posted: Tue Aug 22, 2006 7:41 pm
by basscleff
updated
Posted: Tue Aug 22, 2006 7:48 pm
by tfflivemb2
Brent has 2 sticks of 512mb PC2700 ram for $30 each...highly recommended.
If you want smaller, I might have a stick or two of 256mb PC2700/2100.
Posted: Fri Sep 08, 2006 7:42 pm
by basscleff
still looking for these parts
Posted: Thu Sep 28, 2006 1:03 pm
by basscleff
still searching for these parts....
Posted: Thu Sep 28, 2006 1:13 pm
by tfflivemb2
Will
this work for the LCD?
Posted: Thu Sep 28, 2006 1:48 pm
by basscleff
hi there, it doesn't list it in the IBM R51 hmm.
I need:
- 14.1" XGA
Samsung - 11P8352
Hydis - 92P6745
I believe some T4x are compatible.
Too bad, your link was spot on, price was good too.
I just can't bring myself to spend $175 +++
thx!
Posted: Thu Sep 28, 2006 2:05 pm
by bontistic
Hi,
I might have a solution but only if you're willing to switch to 15" ?
R52 Shell
15" SXGA+
6 Cell Battery - barely used
You basically just slap in your 14" m/b and you're good to go
PM me if you're interested
Thanks,
Mike
T41 LCD will fit...
Posted: Mon Oct 02, 2006 10:36 am
by basscleff
still would love to find a lcd for this...
part numbers:
LCD panel, 14.1-in. XGA
Samsung - 11P8352
LCD panel, 14.1-in. XGA
HYDIS - 92P6745
Posted: Thu Oct 05, 2006 12:59 pm
by basscleff
bump
Posted: Wed Oct 25, 2006 12:21 am
by basscleff
still need a screen, and the lcd bezel
Posted: Mon Nov 06, 2006 8:41 am
by basscleff
still looking for FRU:
LCD panel, 14.1-in. XGA
Samsung - 11P8352
HYDIS - 92P6745
Posted: Mon Nov 06, 2006 12:40 pm
by tfflivemb2
Have you tried the LCD from the R31? They are both XGA 14.1", correct?
Posted: Mon Nov 06, 2006 9:12 pm
by basscleff
will try it once my parts machine arrives
I also have a nice HP N6000c that needs same size..and same connector... so ultimately, I need a few of the same lcd's
Posted: Mon Nov 06, 2006 9:30 pm
by tfflivemb2
Hopefully, you will find that you are not as limited as you think that you are, in finding a replacement LCD.
Posted: Mon Nov 06, 2006 9:38 pm
by basscleff
very true.
Posted: Sat Jan 06, 2007 2:01 pm
by basscleff
still need front bezel