FS: t42p 15" sxga+ lcd, with cable and inverter. free s

Message

cirthix · #1 Post by **cirthix** » Wed Oct 10, 2007 6:09 am

15" 1400*1050, but there seems to be some dust inside the glass. The original inveter and cable (for a 15" t4*) are included.

$100 for the lcd, shipped
$20 for the inverter, shipped
$15 for the cable, shipped
$125 for everything, shipped.

scroll down for links to pictures.

Old OP (edited):
I have a t42 motherboard, radeon 9600. board is modified to always run at 133fsb, so the low-voltage 1.4 runs at 1.86. the vid card can run at 450/340 or so stably. I'm looking to sell either the board+cpu+lcd (15" 1400*1050, but there seems to be some dust inside the glass) or to buy a casing to use it as a laptop. SOLD!

Everything works perfectly.

90 for the panel, 200 for the board+cpu (note that pc2700 runs at 221mhz and pc2100 runs at about 170, so you need good ram) AVAILABLE!

bluetooth card for it: 15 bucks, free if you buy the panel+board. SOLD!

shipping cost=actual shipping cost. flat rate box or however else you want it, you pay the actual cost.

if you're interested, email me. cirthix at gmREMOVEail dot com

http://img267.imageshack.us/img267/8233/p4170133zr5.jpg
http://img210.imageshack.us/img210/8229/p4170134bh9.jpg
http://img523.imageshack.us/img523/5346/p4170135fx4.jpg

I'll upload better pictures when I get into bios (no usb keyboard at the moment)

Admin Edit: Please read, and follow, the Forum Rules regarding posting of images

clickpoint · #2 Post by **clickpoint** » Wed Oct 10, 2007 7:44 am

you got email!

kippen · #3 Post by **kippen** » Wed Oct 10, 2007 2:57 pm

I'll take the bluetooth card if you still have it.

Let me know!

cirthix · #4 Post by **cirthix** » Thu Oct 11, 2007 11:06 am

email responded to, bluetoth module probably gone.

edit: BLUETOOTH IS SOLD

cirthix · #5 Post by **cirthix** » Thu Nov 15, 2007 6:18 pm

cirthix · #6 Post by **cirthix** » Sat Nov 17, 2007 5:26 pm

pics, lots of pics. the first bunch is of the lcd adn the dust inside of it. no, it's not scratched, that's dust inside the panel. hard to get good pics of, but it is fixable if you take it apart and clean it.

http://img62.imageshack.us/my.php?image=p4190141lf1.jpg
http://img61.imageshack.us/my.php?image=p4190144wj2.jpg
http://img522.imageshack.us/my.php?imag ... 145iv3.jpg
http://img127.imageshack.us/my.php?imag ... 146rg9.jpg
http://img210.imageshack.us/my.php?imag ... 147ko6.jpg
http://img152.imageshack.us/my.php?imag ... 148no6.jpg
http://img84.imageshack.us/my.php?image=p4190149mc3.jpg
http://img263.imageshack.us/my.php?imag ... 150si0.jpg

The whole thing:
http://img86.imageshack.us/my.php?image=p4190151oe0.jpg
Note that the proc speed is detected wrong. it's actually 1866, but the t42 board doesn't know how to recognize the 133fsb that it's running at

.

The mod to force it to 133fsb:
http://img221.imageshack.us/my.php?imag ... 155yb9.jpg
http://img218.imageshack.us/my.php?imag ... 157jt3.jpg
I don't remember what I had to change, as it's been a while. If someone posts original pics, I can tell you

.

cirthix · #7 Post by **cirthix** » Mon Dec 17, 2007 11:57 am

bump. someone take this box out of my room!

cirthix · #8 Post by **cirthix** » Thu Dec 20, 2007 3:42 am

cirthix · #9 Post by **cirthix** » Sat Jan 19, 2008 6:23 pm

board+cpu pending, lcd still available

cirthix · #10 Post by **cirthix** » Mon Feb 04, 2008 3:59 am

mobo+cpu sold, lcd still available.

FS: t42p 15" sxga+ lcd, with cable and inverter. free s

FS: t42p 15" sxga+ lcd, with cable and inverter. free s

Who is online