Thinkpads Forum

A little cleanup has brought these into the sunlight...

1) Port Replicator II: P/N 74P6734. Some scratches, but works fine. No AC adapter included. Works with most post-600 series ThinkPads, excluding some R4 and R5 models. $20 shipped.SOLD!!!
2) A3x series lid (LCD cover) from a 14" A30, non-wireless. P/N 26P9423.Very good to excellent physical condition, minor scratching, 8.8 out of 10. Hinges included, but no hooks (latches). $20 shipped.
3) A3x series palmrest/bezel. P/N 26P9446.Excellent condition, 9 out of 10 at least.SOLD!
4) A30 heatsink/fan, P/N 26P9392, FRU 26P9630-$10 shipped
5) A3x series generic main battery, health in green, 27 cycles, holds 100% of original design capacity, excellent physical and working condition-$30 shipped.- SOLD!
6) Original IBM A3 series battery, manufactured 10/03, NOS with 1 (one) cycle, original box included, health in green, holds 100% of design capacity - $45 shipped- SOLD!


PM with any questions and/or concerns.

For potential buyers, here is a list of systems supported by the Port Replicator II:

http://www-307.ibm.com/pc/support/site. ... IGR-4NXNTP

ThinkPad A20, A21, A22
ThinkPad A30, A31
ThinkPad R30, R31, R32
ThinkPad R40
ThinkPad R50, R51, R52
ThinkPad T20, T21, T22, T23
ThinkPad T30
ThinkPad T40/p, T41/p, T42/p, T43/p
ThinkPad X20, X21, X22, X23, X24
ThinkPad X30, X31

Note: Not supported on ThinkPad R40e, R50e, R51e, and R52e systems

Thanks, Sri! You rule!!!

Hey there.
About that A3x series lid for the LCD. You say it's for the 14" LCD.
Is there a diffrent one for the A3x 15" laptops?
I buddy of mine has an A31 with 15" XGA lcd. The LCD cover lid(what the lcd fit's into) is cracked up in the corner.He droped the laptop and the lcd is only held up by one side now.

If that one dont fit the A3x 15" lcd's would you know for one?
Thanks
Bill

Bill,

To the best of my knowledge and belief, the lids are the same. However, there is a difference between wireless and non-wireless ones, not only in antennas (or lack thereof) but also in size...this has been brought to my attention by a fellow forum member who got stuck exchanging these...

I'll do some further research and let you know.

EDIT:

The FRUs are different...and there are more of them than I've been aware of...apologies.

gator wrote:For potential buyers, here is a list of systems supported by the Port Replicator II:

ThinkPad T30
ThinkPad T40/p, T41/p, T42/p, T43/p

I had a T30 and the port replicator that I had for it would not fit my T40 at all!
Is the port replicator II somehow backwards compatible with both, while the T30 replicator is not compatible with the T40?

You've probably had a PR 1...PR2 actually gives you pictures on how to fit it on T4/R5(one picture) and X3/T3/R4/A3 (second picture)...so, yes it is backward compatible if that's what you choose to call it...

Update and bump.

Bump.

PM sent

PM replied to.

Bump.

Bump.