Page 1 of 1
FS:T60 C2D1.66 Flexview $600 with pix SOLD
Posted: Fri May 16, 2008 11:27 pm
by lazyazn
2613 CTO
****I am willing to sell the full flexview assembly on this laptop for 200 shipped. obo*****
System Processor: Intel® Core™ 2 Duo processor T5500 1.6GHz
Operating System: Windows XP Professional
Display Panel: wide viewing angle & high density Flexview display 1400x1050
System graphics: ATI Mobility X1300
Total memory: 1 GB DDR2 SDRAM 667MHz SODIMM Memory (2 DIMM)
Hard Drive: 80GB Hard Disk Drive, 5400rpm
Pointing Device: UltraNav (TrackPoint and TouchPad)
Optical device: CD-RW/DVD
System expansion slots: PC Card Slot & Express Card Slot
Wireless cards: ThinkPad 11a/b/g Wi-Fi wireless LAN Mini-PCIe
NOTE:the motherboard fan makes very load noise, as of now, but going to be fixed next tuesday hopefully.
Comes with restore disks they are not the original ones.
Warranty expired on 12-11-07
Pix
http://s185.photobucket.com/albums/x101 ... =slideshow
Screen shots will be posted later.
$600 shipped.
Posted: Sat May 17, 2008 8:56 am
by ajkula66
Not to knock down your post, but given the specs this is a T60, and not T60p. GPU should be ATi 5200 if it were a T60p. Also, this generation of T60p units would have a 1600x1200 (UXGA) LCD.
Posted: Sat May 17, 2008 9:49 am
by lazyazn
thanks for the heads up ajkula66. I wasn't sure on that issue either, but when i looked up the type number it said t60p on the lenovo site.
However, i will change it to t60 and price dropped.
Posted: Sun May 18, 2008 4:23 am
by ZaZ
The T7200 runs at 2GHz not 1.66GHz to the best of my knowledge.
Posted: Sun May 18, 2008 10:40 pm
by lazyazn
cpu type corrected. pix updated.
Posted: Tue May 20, 2008 4:29 pm
by lazyazn
price drop
Posted: Tue May 20, 2008 4:34 pm
by tonepaq
What can the cpu be upgraded to?
Posted: Tue May 20, 2008 4:37 pm
by lazyazn
i dont really know. Is there a way that i can i look it up?
Posted: Tue May 20, 2008 4:44 pm
by gator
You can use CPU-Z ... just check if your systemboard is rev. 3 or higher ... AFAIK, most core duo 2613 models are.
Posted: Tue May 20, 2008 7:36 pm
by lazyazn
Posted: Tue May 20, 2008 8:10 pm
by tonepaq
Posted: Thu May 22, 2008 2:20 pm
by lazyazn
just ordered a heatsink, so the fan noise is going to be fixed.
Posted: Thu May 22, 2008 4:17 pm
by tonepaq
You have pm
Posted: Thu May 22, 2008 4:46 pm
by Kyocera
How long you guys been here and you don't know the rules about pictures.
You need to turn those into links! OR post a warning in the title. C'mon. Marketplace is for sales anyway not discussions.
If you don't do it i'm locking up this thread.
Posted: Thu May 22, 2008 4:50 pm
by lazyazn
sorry, i changed the title trying to fit everything in there and forgot about the picture part.
Everything has been fixed.
Posted: Thu May 22, 2008 7:44 pm
by BillMorrow
lazyazn wrote:sorry, i changed the title try to fix fit everything in there and forgot about the picture part.
Everything has been fixed.
not so much..
i fixed both pix to links..
also, WHAT DISPLAY does that have..?
resolution..?
Posted: Thu May 22, 2008 7:50 pm
by lazyazn
the resolution is 1400 x 1050 flexview.
Posted: Fri May 23, 2008 3:39 pm
by gator
lazyazn, your machine does have rev. 03 motherboard, so it should take in a Core 2 Duo.
Posted: Sun May 25, 2008 1:30 am
by crashnburn
gator wrote:lazyazn, your machine does have rev. 03 motherboard, so it should take in a Core 2 Duo.
Hmm.. so would it support 4G RAM under the right OS or does the motherboard limit that.
Posted: Sun May 25, 2008 4:13 am
by ZaZ
I believe it does.
Posted: Mon May 26, 2008 6:21 pm
by whizkid
This machine will not support 4GB RAM. It will use 3GB RAM, but you can install 4GB. It is a chipset limitation, and no operating system can use more than 3GB on this machine.
Posted: Mon May 26, 2008 9:02 pm
by lazyazn
price drop.
Posted: Tue May 27, 2008 12:46 pm
by DarkScythe
Hello,
I am new here (I frequent other boards though) but I am interested and have sent you a PM.
Thanks in advance!
