FS: Intel SL6VC P4M 2.4 CPU upgrade A31/p, T30, R40

Message

ajkula66 · #1 Post by **ajkula66** » Thu Jul 24, 2008 8:15 pm

Pulled out of an upgraded A31p with a dead board, guaranteed against DOA.

A very good upgrade that will work in:

A31, A31p

T30

R40 (non-PM based units), possibly R32

Specs can be found here:

http://processorfinder.intel.com/detail ... Spec=SL6VC

Asking $50 plus actual shipping, and will ship worldwide.

Please be advised that this upgrade may require a different heatsink/fan depending on the CPU you're upgrading from.

On A31/p, if you're going from a CPU that is under 1.8 you will need to change the heatsink as well.

Similar has been reported for T30, and I believe that R40 would not be an exception to the rule either.

Feel free to PM me with any questions/concerns that you might have.

CeeDee · #2 Post by **CeeDee** » Thu Jul 24, 2008 9:54 pm

George, do I understand you correctly, that I would be ok with the existing heatsink and fan on a 1.8 t30. Also would you have any idea of the temperature increase?

basketb · #3 Post by **basketb** » Thu Jul 24, 2008 10:05 pm

So, you don't happen to have the appropriate heat sink for an A31p for sale as well, do you?

ajkula66 · #4 Post by **ajkula66** » Thu Jul 24, 2008 10:52 pm

I don't have the appropriate heatsink for A31p, I gave it to someone along with a spare 2.0 CPU that I had...but it's like anywhere from $12-15 on eBay, FRU 62P4092

I've never upgraded the CPU on T30, so I don't know from experience, but HMM lists three different fans, you may want to take a look yourself...

NorrisCell · #5 Post by **NorrisCell** » Fri Jul 25, 2008 3:58 pm

I ran an SL6VB 2.2 in my T30 with the original fan for a while. It ran at very high temperatures a lot of times, often topping out above 70 degrees celcius if I didn't have the unit on some sort of cooling pad. The fan is a necessary upgrade unless you only plan to run light tasks in a controlled environment, but the performance upgrade was definitely noticeable over my previous 1.8

#6 Post by **RealBlackStuff** » Fri Jul 25, 2008 4:24 pm

For that 2.4 upgrade in a T30, you need the Fan P/N 91P8908, otherwise you'll have a frying pan!

scosgt1 · #7 Post by **scosgt1** » Fri Jul 25, 2008 4:47 pm

I have upgraded a number of 1.7 A31p units to 2.4 and never changed the fan and never had any problems at all.
Do use arctic silver. NOT white thermal.

ajkula66 · #8 Post by **ajkula66** » Mon Jul 28, 2008 1:19 pm

Given what scosgt1 reports, this is an even cheaper upgrade than I was thinking (and doing) at least for A31/p units...

Bump, while we're at it...

scosgt1 · #9 Post by **scosgt1** » Mon Jul 28, 2008 2:11 pm

I have three of them all upgraded to 2.4 Ghz, all three work error free.

sarbin · #10 Post by **sarbin** » Mon Jul 28, 2008 2:35 pm

...and my a31p, originally a 1.8, as been cranking right along at 2.4 now for over three years now and hasn't flinched once either.

CeeDee · #11 Post by **CeeDee** » Mon Jul 28, 2008 3:40 pm

You got PM

CeeDee · #12 Post by **CeeDee** » Mon Jul 28, 2008 3:42 pm

You got PM

ajkula66 · #13 Post by **ajkula66** » Mon Jul 28, 2008 4:33 pm

No PM received, please re-send or email me...

FWIW, when it comes to A31p, 1.8 and 2.0 have the same fan...

CeeDee · #14 Post by **CeeDee** » Mon Jul 28, 2008 6:38 pm

Another PM sent!

NorrisCell · #15 Post by **NorrisCell** » Tue Jul 29, 2008 12:50 am

scosgt1 wrote:I have three of them all upgraded to 2.4 Ghz, all three work error free.

Man, I must've done something wrong with my thermal paste then, cuz mine was HOT. I wish I could've found a CPU like this for $50 a year ago, geez. They were going for $100+, easily.

sarbin · #16 Post by **sarbin** » Tue Jul 29, 2008 1:23 am

^^^ +1
i don't even want to admit what i paid for mine 3yrs ago.

this is a steal for whoever picks it up, and it's from one the best sellers around, as a bonus.

ajkula66 · #17 Post by **ajkula66** » Sat Aug 09, 2008 10:21 am

Bump.

FS: Intel SL6VC P4M 2.4 CPU upgrade A31/p, T30, R40

FS: Intel SL6VC P4M 2.4 CPU upgrade A31/p, T30, R40

2.4

Who is online