Need to Buy: Plastic insert for CD-ROM bay

Message

rxblitzrx · #1 Post by **rxblitzrx** » Sat Sep 20, 2008 11:24 am

I never use my CD-ROM so I plan to just remove it to save weight. Does Lenovo sell some sort of plastic insert to cover the hole?

mod edit: moved to marketplace.

732 · #2 Post by **732** » Sat Sep 20, 2008 11:48 am

It's called weight saver and I know the UltraBase had such piece of plastic in the DVD-slot for filling in.

truk · #3 Post by **truk** » Sat Sep 20, 2008 11:55 am

I can't find any placeholder, but you could put in an empty hard drive adapter to save weight.

Czechnology · #4 Post by **Czechnology** » Sun Sep 21, 2008 9:31 am

Is the weight difference of the drive really so significant to you?
If I had no use for the CD/DVD drive, I'd rather put a secondary battery in there...

awolfe63 · #5 Post by **awolfe63** » Sun Sep 21, 2008 10:59 am

Part number is:

FRU 13N5108

Google it and you will find sellers for around $20.

Radioguy · #6 Post by **Radioguy** » Mon Sep 22, 2008 5:13 am

I thought that FRU number was a little vague. Even for T60's and T61's the FRU was the same (IIRC), but there were different molds used for each. Now they use the same for the new T models too?

TTA · #7 Post by **TTA** » Mon Sep 22, 2008 7:55 am

I have a bunch of ultrabay 2000 blanks PN: 26p9859
but I don't have any ultrabay enhanced or ultrabay slim blanks.
I'm sure one could be trimmed down to fit in a thinner bay if you were so inclined.
I'd sell one for $5.00 shipped.

rada · #8 Post by **rada** » Mon Sep 22, 2008 7:55 am

Wow! I was just about to post about this. Thanks guys!

@TTA: do you have the measurements/a picture of these?

rada · #9 Post by **rada** » Mon Sep 22, 2008 8:05 am

Radioguy: Same FRU: http://cgi.ebay.ca/Lenovo-UltraBay-Cove ... dZViewItem

Radioguy · #10 Post by **Radioguy** » Mon Sep 22, 2008 8:58 am

rada wrote:Radioguy: Same FRU: http://cgi.ebay.ca/Lenovo-UltraBay-Cove ... dZViewItem

You don't understand. I'm not denying they are using the same number for this part. I'm stating that they have been using this FRU number for at least two different versions of the same part.

I remember seeing posts about this previously, where people claimed there were versions that were snug with a T41 or T61, and ones that weren't, but both versions had the same FRU number. Now the same number is being used for the travel bezel for the new T series, and I wonder if a third now exists.

rada · #11 Post by **rada** » Mon Sep 22, 2008 12:56 pm

ah, i get it. that's really odd.

basketb · #12 Post by **basketb** » Mon Sep 22, 2008 5:43 pm

Radioguy wrote:...
I remember seeing posts about this previously, where people claimed there were versions that were snug with a T41 or T61, and ones that weren't, but both versions had the same FRU number. Now the same number is being used for the travel bezel for the new T series, and I wonder if a third now exists.

My guess would be that the ones that were not snug were not genuine IBM/Lenovo parts but aftermarket.

Radioguy · #13 Post by **Radioguy** » Mon Sep 22, 2008 6:00 pm

basketb wrote:
Radioguy wrote:...
I remember seeing posts about this previously, where people claimed there were versions that were snug with a T41 or T61, and ones that weren't, but both versions had the same FRU number. Now the same number is being used for the travel bezel for the new T series, and I wonder if a third now exists.
My guess would be that the ones that were not snug were not genuine IBM/Lenovo parts but aftermarket.

No, because if you look at that auction, you'll see the compatible models the seller lists. That cross section does use travel bezels that have the same FRU number, yet drive bays that are not the same size. Plus, I believe in previous posts that people acquired the different sized bezels through Lenovo/IBM directly. (Sometimes included with docks)

In case you're wondering about the fit: a 13N5108 that came out when the T41 was new should fit that model snugly, but the same one will bounce around in the T6* drive bay.

Who knows about a T400/500.

732 · #14 Post by **732** » Tue Sep 23, 2008 1:18 am

I thested a bezel from X6 UltraBase in a T500 and it fits fine. I believe all Ultrabay Slim bezels are the same (this includes T4x) and also fit Serial Ultrabay Slim.

Radioguy · #15 Post by **Radioguy** » Tue Sep 23, 2008 10:57 am

Unfortunately, that's not the case with all the 13N5108 bezels.

The one you have might be fine between those two drivebays, but the FRU number was also used for T41 bezels etc. They just aren't the same size.

Additionally, 62P4331 and 13N5108 seem to be interchangeable despite one being curved, and one flat, but even among flat bezels, there is variation.

DirkM · #16 Post by **DirkM** » Wed Sep 24, 2008 3:50 pm

The insert that came with my X200 UltraBase fits the T400 and is P/N 44C0691. There is no FRU on that thing though. The older insert that came with the X60 and X61 Ultrabase are P/N 62P4331 and they don't fit the T400 bay. One could probably modify the older inserts to fit the new bay as they are only a little different in one corner (see picture).

http://i61.photobucket.com/albums/h57/A ... insert.jpg

Radioguy · #17 Post by **Radioguy** » Wed Sep 24, 2008 4:34 pm

DirkM wrote:The insert that came with my X200 UltraBase fits the T400 and is P/N 44C0691. There is no FRU on that thing though. The older insert that came with the X60 and X61 Ultrabase are P/N 62P4331 and they don't fit the T400 bay. One could probably modify the older inserts to fit the new bay as they are only a little different in one corner (see picture).

http://i61.photobucket.com/albums/h57/A ... insert.jpg

Thanks for confirming that. At least they had the good sense to issue a new FRU number this time.

Tony Chan · #18 Post by **Tony Chan** » Wed Sep 24, 2008 7:14 pm

Wonder where can we order this?

Need to Buy: Plastic insert for CD-ROM bay

Need to Buy: Plastic insert for CD-ROM bay

RE:placeholder

Who is online