SOLD: Complete T60 14" XGA LCD Assembly for $59 del.
Posted: Mon Jun 29, 2009 2:19 pm
SOLD: 14.1" XGA LCD Complete Assembly from T60. This includes the entire lid with LCD, inverter, ThinkLight, LCD cable, wireless antennas, hinges, latches, T60 clear plates, etc. It will work perfectly with either an Intel or ATI GPU.
*Image link removed*
More high resolution pictures --> *Link Removed*
(Note: The Nokia test pattern itself is dark in the center of the red/green/blue color bar; the LCD has even, bright lighting.)
The XGA LCD is very bright and does not have any dead/stuck pixels. The LCD surface is in excellent condition with only the faintest, tiny scuffs from touching the keyboard. The LCD bezel is in excellent condition. The inverter, hinges and latches are perfect. The only issue is the cosmetics of the cover. The cover has a few good scratches and is pretty much uniformly covered in light, fine scratches - see pictures! I cleaned off a sticker with an abrasive sponge - not a good idea!
This is a simple LCD swap procedure for any 14.1" T60 machine. (If you have any T60 with a 14.1" LCD, you can easily install this one. Note, if you have Bluetooth and/or a WWAN, you'll have to either move your BT module/WWAN antenna and possibly the LCD cable to this assembly or move this LCD to your assembly, that takes more time.)
This is a nice display and great for a machine in need, but the cover is scratched up, it is priced accordingly.
Reduced to $59 packed well and delivered in the U.S. PayPal, USPS money order or cash accepted.
*Image link removed*
More high resolution pictures --> *Link Removed*
(Note: The Nokia test pattern itself is dark in the center of the red/green/blue color bar; the LCD has even, bright lighting.)
The XGA LCD is very bright and does not have any dead/stuck pixels. The LCD surface is in excellent condition with only the faintest, tiny scuffs from touching the keyboard. The LCD bezel is in excellent condition. The inverter, hinges and latches are perfect. The only issue is the cosmetics of the cover. The cover has a few good scratches and is pretty much uniformly covered in light, fine scratches - see pictures! I cleaned off a sticker with an abrasive sponge - not a good idea!
This is a simple LCD swap procedure for any 14.1" T60 machine. (If you have any T60 with a 14.1" LCD, you can easily install this one. Note, if you have Bluetooth and/or a WWAN, you'll have to either move your BT module/WWAN antenna and possibly the LCD cable to this assembly or move this LCD to your assembly, that takes more time.)
This is a nice display and great for a machine in need, but the cover is scratched up, it is priced accordingly.
Reduced to $59 packed well and delivered in the U.S. PayPal, USPS money order or cash accepted.