Thinkpads Forum

I would like to put to the maximum (1Gb) the ram of my R40 - 2681-F7G, currently with one stick of 256Mb.
Both with 2x512Mb, ora 1Gb stick.
Is it correct that the type should be PC2100 DDR S.O. Dimm? Or even PC2700 would fit?

How much I am going to spend for this?
If this model of RAM is currently too expensive, I would be satisfied with one 512Mb stick to add to the current stick of 256Mb.

I am in Italy, Rome, and eventually I am able to pay only by a Visa Electron circuit compatible card.

Maximum for that machine is actually 2GB, both PC 2100 and PC2700 will work.

ajkula66 wrote:Maximum for that machine is actually 2GB, both PC 2100 and PC2700 will work.

isn't 2Gb the maximum for 2681 Pentium M machines?

2681-F7G is a Pentium 4-M 2GHz machine, isn't it?

does it mean is a Pentium M or a Pentium 4? Confused

I am reading here

http://www-307.ibm.com/pc/support/site. ... MIGR-45916

and here

http://www-307.ibm.com/pc/support/site. ... ind=113129

I've had more than 1GB in several R40 units that were P4M based and am speaking from experience.

ajkula66 wrote:I've had more than 1GB in several R40 units that were P4M based and am speaking from experience.

in this case I trust on you.
good to know. thanks.

Annalisa

Just found this on Ebay.

http://annunci.ebay.it/annunci/computer ... -5/3397412

Is this module likely to be compatible with my R40- 2681-F7G?

Annalisa

Yes it is.