Thinkpads Forum

Continuing to clear out my workspace....

For sale is a bare motherboard with the PCMCIA cage. The FRU is 41W5273. I have tested these boards with a Core Duo CPU.

It fits 14" 4:3 (non-widescreen) LCD models only. Although this is from a R60, I'm fairly certain these work in 4:3 T60 machines as well. I have installed one in a T60 base and it fit just fine. I sold one to someone on Ebay and he reported back that it worked for him as well.

I have 1 available. $40 shipped w/in USA.

Edit #1: Will not work with R60E machines due to lack of docking port. Will not work with 15" models.

Edit #2: Price reduced.

Edit #3: One sold, one left.

Would it work with 4:3 SXGA+ LCD from T60?

Raceboy wrote:Would it work with 4:3 SXGA+ LCD from T60?

It should since the T60 and R60 use the same panels. I've plugged in a SXGA+ panel from an R60 into one of these boards and it worked fine.

For your information, this won't work in an R60e. (mentioned in the listing) This board has a docking station connector and there is no space in an R60e base. Also, I believe all the R60e machines are 15". The 14" and 15" boards are entirely different in R60

richk wrote:For your information, this won't work in an R60e. (mentioned in the listing) This board has a docking station connector and there is no space in an R60e base. Also, I believe all the R60e machines are 15". The 14" and 15" boards are entirely different in R60

@richk: Thanks for pointing that out this information. I will clarify that this is for a 14" non "e" machine.

Price reduced.