Page 1 of 1
Are replacement screens for T60 14.1" SXGA+ all compatible?
Posted: Sun May 15, 2011 5:40 pm
by Bobroberto
New screens are available for $100 +/-.
Are there any issues regarding compatibility of replacement screen?
Does P/N or FRU need to match?
Any matching issues between existing inverter and replacement screen?
Any compatibility issues w/ replacement screens?
Posted: Sun May 15, 2011 6:16 pm
by Bobroberto
Are there any matching issues for installing new screen in T60 14.1 XSGA+? Inverter? Changes is production run?
Existing screen BOE HYDIS HT 14P12-100 P/N 13N7060 FRU 13N7061
Re: Are replacement screens for T60 14.1" SXGA+ all compatible?
Posted: Sun May 15, 2011 8:28 pm
by yak
As long as you get one of the 14.1" T60 LCDs, you'll be OK. You can even swap between XGA<->SXGA+ and cable/inverter remain the same. The important thing is to get one of the LCDs that were mounted in T60 series. Avoid anything listed as "compatible". LCDs from T4x won't work either. You can find the T60 FRUs in the HMM.
Re: Any compatibility issues w/ replacement screens?
Posted: Sun May 15, 2011 9:42 pm
by Harryc
There are no problems as long as you install an IBM FRU# for the 14" T60.
Your choices are;
Samsung 13N7059
BOE-Hydis 13N7061
TMD 13N7063
http://www-307.ibm.com/pc/support/site. ... GR-62784#8
Re: Any compatibility issues w/ replacement screens?
Posted: Sun May 15, 2011 9:52 pm
by Harryc
Topics merged - Please do not cross post (duplicate posts) on the same topic on the forums.
Re: Any compatibility issues w/ replacement screens?
Posted: Thu May 19, 2011 6:21 pm
by Bobroberto
Thanks guys for the tips. I have asked ebay seller of new screen ($95 +/-) to verify manufacturer and model but so far they will only claim the screen will work. So, I have doubts. Has anyone been successful with replacments from Screenaid? I did find one seller that lists a valid IBM FRU#, but screen is 50% more that low price seller. So, I remain bumfuzzled and continue to use external monitor.....
Re: Any compatibility issues w/ replacement screens?
Posted: Thu May 19, 2011 10:48 pm
by 91011
You might consider this SXGA+ lid assembly - $51 - great deal and without a doubt will work in your T60.
http://cgi.ebay.com/Complete-LCD-Assemb ... 2a10bb92b8