SOLD! T60p, 15" UXGA AFFS, well-worn, runs 100%, affordable
Posted: Sat Jul 02, 2011 12:01 pm
the basics:
ThinkPad T60p (2007-A16)
Based on 2007-93U:
T2500(2GHz)
2GB RAM..................now 1GB (2x512MB)
100GB 7200rpm HD.........now 60GB/5400rpm
15in 1600x1200 LCD
256MB ATI FireGL V5200
CDRW/DVD
Intel 802.11abg wireless
Bluetooth/Modem
1Gb Ethernet
UltraNav
Secure chip
Fingerprint reader
9c Li-Ion batt...................now 6-cell in green
WinXP Pro...............COA intact
No AC adapter
This was my testbed for various purposes over the past couple of months and is one heck of a workhorse. Mint it's not - perfectly functional it is.
known imperfections:
- Normal wear and tear for a machine of this generation
- Small crack in the upper LH corner of the lid
- A piece of plastic missing from the fan grille in the back
- Three VERY unusual pressure marks (?) on an otherwise extremely bright and very clean Hydis LCD. They are visible on solid black background ONLY, and appear as areas of blue - not the white or black that one would normally associate with this type of defect. Once again, these are ENTIRELY INVISIBLE on any other background. I've never seen anything quite like this.
Apart from the aforementioned flaws, the machine runs great.
Asking $200 firm + shipping at cost to almost anywhere.
PM or email me directly to tataslonATaol.com with any questions/concerns.
ThinkPad T60p (2007-A16)
Based on 2007-93U:
T2500(2GHz)
2GB RAM..................now 1GB (2x512MB)
100GB 7200rpm HD.........now 60GB/5400rpm
15in 1600x1200 LCD
256MB ATI FireGL V5200
CDRW/DVD
Intel 802.11abg wireless
Bluetooth/Modem
1Gb Ethernet
UltraNav
Secure chip
Fingerprint reader
9c Li-Ion batt...................now 6-cell in green
WinXP Pro...............COA intact
No AC adapter
This was my testbed for various purposes over the past couple of months and is one heck of a workhorse. Mint it's not - perfectly functional it is.
known imperfections:
- Normal wear and tear for a machine of this generation
- Small crack in the upper LH corner of the lid
- A piece of plastic missing from the fan grille in the back
- Three VERY unusual pressure marks (?) on an otherwise extremely bright and very clean Hydis LCD. They are visible on solid black background ONLY, and appear as areas of blue - not the white or black that one would normally associate with this type of defect. Once again, these are ENTIRELY INVISIBLE on any other background. I've never seen anything quite like this.
Apart from the aforementioned flaws, the machine runs great.
Asking $200 firm + shipping at cost to almost anywhere.
PM or email me directly to tataslonATaol.com with any questions/concerns.