WTB/LF: a *perfect* 15" UXGA IPS/AFFS LCD, T4x/T6x
Posted: Sat Sep 10, 2011 9:30 am
Long story short, I accidentally cracked the downright perfect LCD on my "main" T43p last month and have been devastated ever since.
I'm looking for a suitable replacement, which *must* be perfect, which means:
- absolutely no dust specs, pressure marks, surface scratches or dead pixels
- sufficient brightness with no major shadowing in the lower corners
An ideal candidate would be an ID Tech UXGA FlexView panel from T6x/T4x/R5x generation. I will consider a Hydis AFFS if you have one, although ID Tech is strongly preferred. Please be aware that most of (otherwise fabulous) screens from A30p/A31p are actually 1mm thicker, and therefore do not fit properly into a T4x lid. We can always check the FRUs, parts numbers etc. and verify whether it would work...
To make two things clear:
1) I'm not looking for a good, or very good panel. That I already have. Only the best will do this time around.
2) Given that this LCD is to be installed in my own machine, and used exclusively by silly old me, expect me to be difficult with questions and requirements, but also generous with the payment.
PM or email me directly to tataslonATaol.com with any questions/concerns/offers
I'm looking for a suitable replacement, which *must* be perfect, which means:
- absolutely no dust specs, pressure marks, surface scratches or dead pixels
- sufficient brightness with no major shadowing in the lower corners
An ideal candidate would be an ID Tech UXGA FlexView panel from T6x/T4x/R5x generation. I will consider a Hydis AFFS if you have one, although ID Tech is strongly preferred. Please be aware that most of (otherwise fabulous) screens from A30p/A31p are actually 1mm thicker, and therefore do not fit properly into a T4x lid. We can always check the FRUs, parts numbers etc. and verify whether it would work...
To make two things clear:
1) I'm not looking for a good, or very good panel. That I already have. Only the best will do this time around.
2) Given that this LCD is to be installed in my own machine, and used exclusively by silly old me, expect me to be difficult with questions and requirements, but also generous with the payment.
PM or email me directly to tataslonATaol.com with any questions/concerns/offers