Access Connection v4.52 available for Vista and XP

[bill bolton]

A new release of Access Connection is available, dated April 4, 2008

Vista version here

XP version here

CHANGES IN THIS RELEASE
Version 4.50, 4.51 and 4.52

[Important updates]
Nothing.

[New functions or enhancements]
- Integration with AVAYA IP Softphone.
- Profile Aging feature.
- Ethernet Speed and Duplex setting.
- Wireless WAN PAP/CHAP authentication setting.
- Automatic reconnect VPN setting.
- "Override TCP/IP and DNS defaults" and "Do not automatically include
wireless profiles without security in the roaming list" options in
Client Configuration Policy settings.
- "Disable Ethernet adapter when Ethernet cable is unplugged" option
in Global Settings.
- Roaming speed improvement.

[Problem fixes]
- Profile can not be imported on the Japanese, Korean, simplified
Chinese and traditional Chinese edition of Operating Systems.
- "Operational" is still shown after launching WANLite.
- The following message is not displayed while GPS is searching
satellites.
"A wireless WAN client utility is managing the WAN connection."
- Wireless USB may not be detected.
- An application error occurs after bad credentials with PEAP-MSCHAP
for IBM/ThinkPad/Lenovo Wireless adapters.
- Avaya softphone is launched even if the start option is disabled.
- Audio tuning has to be done every time profile is applied.
- Location switching priority is not maintained after deployment.
- SSO profile does not connect after deployment.
- AT&T Wireless WAN international roaming requires to connect with
AT&T Communication Manager first before using Access Connections.
- Switching from wireless to Ethernet takes 90sec.
- Ethernet save port prompts 2 times for same profile.
- Access Connections crashes when 'No' is selected at PAC prompt.
- Location switching greyed out after SMA migration.
- EAP-FAST connection failure.
- Switching from Static to DHCP does not work on Spanish Windows.
- Wireless static IP profile does not connect on Windows 2000.
- Connection log does not show any data while connected Wireless WAN
by Dialup.
- Wireless WAN dialup connection fails on Windows 2000.
- Connection fails to 11a mode AP when roaming from 11g mode.
- CCX profile can connect even when wrong root certificate is selected.
- Adapter name is not shown in profile view if upgrade from Access
Connections 3.x.
- Wrong German translation of error message.
- Wireless WAN connection fails after hibernation/wakeup with Telus2.

Cheers,

Bill B.