Connect to TV

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
beekeeper42
Posts: 3
Joined: Fri Feb 01, 2013 11:43 pm
Location: McLean, VA, USA

Connect to TV

#1 Post by beekeeper42 » Sat Feb 02, 2013 12:46 pm

I frequently use my T-43 after hours to watch movies on HULU. That works fine. Can someone explain how I can wire the T-43 to our Mitsubishi TV (WS 55315) so I can watch on the BIG screen? I am a old geezer, so be gentle with terminology. Suggestions for alternatives welcome also. Thanks.

Neil
Senior ThinkPadder
Senior ThinkPadder
Posts: 2914
Joined: Sun Aug 07, 2005 5:41 pm
Location: Paragould AR USA

Re: Connect to TV

#2 Post by Neil » Sat Feb 02, 2013 1:36 pm

Hi there beekeeper42, welcome to thinkpads.com

The T43 has an S-Video out jack, so one option would be to connect it to your TV with an S-Video cable. Another option would be to use a VGA cable. What inputs do you have available on your TV?
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8364
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: Connect to TV

#3 Post by pianowizard » Sat Feb 02, 2013 3:15 pm

I used to have a T42, which also had S-video out. I hooked that up to an old TV once and the image was very blurry. My Dell Inspiron 7500's S-video out is just as bad when viewed on my current TV, a 27.5" 1920x1200 HDTV.
Neil wrote:Another option would be to use a VGA cable. What inputs do you have available on your TV?
I looked up the specs for this Mitsubishi TV and learned that it only has these:

S-Video,
Composite,
Component

There are VGA-to-component cables but I don't think they would work, e.g. read the reviews for this cable: http://www.amazon.com/HDE-Adapter-S-Vid ... roduct_top . I think S-video is the only viable option. Why don't you just buy a 23" or 24" LCD monitor and hook up your T43 to it via VGA? These monitors have gotten really cheap. Another idea is to upgrade your Mitsubishi to a new HDTV that has VGA input. HDTVs in the 50-inch range are quite expensive although they consume much less electricity than your old-school TV.
Microsoft Surface 3 (Atom x7-Z8700 / 4GB / 128GB / LTE)
Dell OptiPlex 9010 SFF (Core i3-3220 / 8GB / 8TB); HP 8300 Elite minitower (Core i7-3770 / 16GB / 9.25TB)
Acer T272HUL; Crossover 404K; Dell 3008WFP, U2715H, U2711, P2416D; Monoprice 10734; QNIX QHD2410R; Seiki Pro SM40UNP

craigmontHunter
Senior Member
Senior Member
Posts: 742
Joined: Wed Feb 18, 2009 10:25 pm
Location: Ottawa, Ontario, Canada

Re: Connect to TV

#4 Post by craigmontHunter » Sat Feb 02, 2013 4:14 pm

looking at the TV specs, it looks like it has a DVI input - someone else will have to chime in on this, but I believe that the docks for the T4* have DVI output, but I'm not sure if there are any resolution limitations or video card requirements (I know some models didn't support DVI with intel graphics).

if thats true, then a dock may be the easiest way to connect.

EDIT: if you can live with the quality of the Svideo output, that would be the easiest (its not too bad, I've used it for presentations before)
Elitebook 8440p, i5 520, 8gb, Samsung 840 SSD
Old/Not Working/Dead Laptops:
T61 7661CC2, 4gb, Windows 7 x64, 240gb intel SSD, 500gb Ultrabay drive
Toshiba Portege 7020ct
Thinkpad T41 23737FU
Dell Latitude LS

dr_st
Senior ThinkPadder
Senior ThinkPadder
Posts: 6646
Joined: Sat Oct 29, 2005 6:20 am

Re: Connect to TV

#5 Post by dr_st » Sun Feb 03, 2013 5:01 am

Some places claim it even has a VGA input, in which case a dock might not be required.

Whether DVI or VGA are used, the audio will have to be routed separately. Most TVs who have DVI/VGA inputs will have a separate 3.5mm minijack input for audio, but this needs to be verified. Otherwise, a 3.5mm to RCA will be needed.
Current: X220 4291-4BG, T410 2537-R46, T60 1952-F76, T60 2007-QPG, T42 2373-F7G
Collectibles: T430s (IPS FHD + Classic Keyboard), X32 (IPS Screen)
Retired: X61 7673-V2V, A31p w/ Ultrabay Numpad
Past: Z61t 9440-A23, T60 2623-D3U, X32 2884-M5U

beekeeper42
Posts: 3
Joined: Fri Feb 01, 2013 11:43 pm
Location: McLean, VA, USA

Re: Connect to TV

#6 Post by beekeeper42 » Sun Feb 03, 2013 7:47 am

Thanks to all for your time and information. I have not yet fired up the boiler on the stream-driven Mitsubishi, nor looked through my collection of cables, but I have looked at the connections, read the manuals again, and learned this: 1) The Mitsubishi does not appear to have a VGA input connection, 2) It does have a DVI input, but warns that it is "not intended for use with personal computers..." (I'm not sure if that translates as "don't" or "try, if you want, stupid."), and 3) there are two places for S-video inputs with separate RCA inputs for audio (one place on the front for camcorders, two more on the back panel). It appears that S-video is the route to go. I may try later today, especially if the game in New Orleans turns out to be a bummer. Thanks again to all.

BruisedQuasar
Junior Member
Junior Member
Posts: 406
Joined: Sat Nov 05, 2005 8:12 am
Location: Ann Arbor, Michigan

Re: Connect to TV

#7 Post by BruisedQuasar » Fri Feb 15, 2013 9:40 am

Just a thought. You can buy a two to three year old used 27" to 32" LCD or Plasma TV pretty cheap. People want 50" or larger, 3D (even if they'll never use it), and other newer bells and whistles. Plus manufacturing improvements are bringing down the prices all this year.

A used, "old" tech modern TV would be excellent for you as they have VGA, Composite, S-Video connectors. TVs with only one HDMI port and no USB go seriously cheap. I'd look on Craigslist to get an idea just how cheap you can get one. Here in nearby Ann Arbor, folks are giving away older LCD and Plasma TVs @ some offer (via Craigslist) to pay people to take their heavy fine condition projection TVs (Green city ordinances are such that residents must pay to have such things hauled away and disposed of). I've suggested to young couples on tight budgets that they call residents listing projection TVs for sale after a week or so and politely offer to relieve them of their disposal problem for $25. Works every time. The owner saves $50 & the caller gets paid $25 to take away a nice TV.

Tube TVs go for nothing. I see the last generation of major brand name larger screen tube TVs with RCA, VGA, & other connections all the time at our Goodwill store ---all priced the same $14.99...

beekeeper42
Posts: 3
Joined: Fri Feb 01, 2013 11:43 pm
Location: McLean, VA, USA

Re: Connect to TV

#8 Post by beekeeper42 » Fri Feb 15, 2013 1:36 pm

Excellent suggestion. Thank you!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 2 guests