Page 1 of 1
changing face plates on T23 CDRW/DVD
Posted: Fri Aug 26, 2005 2:03 pm
by Fred Brodeur
I have a Thinkpad T23 2647-4MU with the DVD drive (FRU 08K9648, MKE model SR-8176-M).
I bought a Lite-on LSC-24082K
My problem is the new CDRW/DVD drive face plate is not the same. is it possible to swap the guts out so I have the correct face plate?
Do I have to swap the drive tray?
I'd really appreciate some help with this.
Posted: Fri Aug 26, 2005 6:22 pm
by Nolonemo
People have swapped face plates using some creativity (sometimes glue) but the eject button (and the manual eject hole) have to be in the same place on both drives for it to work. If they don't align, swapping the guts wouldn't fix your problem even if you could do it (in the cases I've seen you can't because the metal shell is intergral to the guts.
Posted: Fri Aug 26, 2005 7:44 pm
by MadeInJapan
Just cut a notch out of the new face plate and live with it. You do know that you have to take the plastic rails off of the old and screw them onto the new one don't you?
Where did you buy the Lite-on and how much was it?
Posted: Sat Aug 27, 2005 2:32 am
by Fred Brodeur
MadeInJapan wrote:Just cut a notch out of the new face plate and live with it. ?
eeeeeeeeeeeewwwwwwww!
MadeInJapan wrote:You do know that you have to take the plastic rails off of the old and screw them onto the new one don't you?
Yes, That was done 10 minutes after I got home.
But it still sticks out. It's profile looks more for a T4X
MadeInJapan wrote:Where did you buy the Lite-on and how much was it?
Ebay for 75 bucks. Wanna buy it?