Page 1 of 1
booting with a network cable plugged in
Posted: Tue Feb 21, 2006 12:52 pm
by yawnmoth
I'm trying to reboot a ThinkPad R40 of mine with the 100mbit ethernet cable plugged in and am having some problems. Basically, whenever I attempt to boot it up, I get the following message:
Code: Select all
Intel(R) Boot Agent Version 4.1.07
Copyright (C) 1997-2002, Intel Corporation
Intel Base-Code, PXE-2.1 (build 083)
Copyright (C) 1997-2002, Intel Corporation
CLIENT MAC ADDR: 00 06 1B D0 41 10 GUID: 1D548481 2DD5 11C6 80DE 8EE28DC59A3F
PXE-E53: No boot filename received
PXE-M0F: Exiting Intel Boot Agent.
Operating System not found
Midway through that message it pauses, saying that it's checking for a DHCP signal or something but then proceeds to print out the rest of the message, overwritting the DHCP message.
Anyway, this is kinda an annoying problem. My current solution is to just unplug it when rebooting it but I'd prefer not to do this. So... any ideas?
Posted: Tue Feb 21, 2006 12:56 pm
by dsvochak
It sounds like you've somehow gotten the BIOS to set the boot agent as a boot device before the hard drive.
Posted: Tue Feb 21, 2006 2:11 pm
by GomJabbar
While this is really beyond my expertise, I would guess that your laptop is trying to boot off of the LAN first. Look in the BIOS menu under Startup and make sure your hard drive - IDE HDD0 is higher up the list than PCI LAN
Posted: Wed Feb 22, 2006 10:11 am
by yawnmoth
The Boot / Network order in the BIOS had been as follows:
Code: Select all
-Removable Devices
Legacy Floppy Drives
-Hard Drive
(some random string)
CD-ROM Drive
IBA 4.1.07 Slot 0240
It now reads more like this:
Code: Select all
-Hard Drive
(some random string)
CD-ROM Drive
-Removable Devices
Legacy Floppy Drives
IBA 4.1.07 Slot 0240
...and now it seems to work. I thought I had tried changing those options before, but I guess I didn't... ah well. Thanks for the tips
Posted: Wed Feb 22, 2006 10:45 am
by jdhurst
Since your network boot was apparently at the bottom (and therefore appears not to be the issue), it looks like it thinks it has a floppy disk and it can't deal with it, causing it to error out.
The way you have set it, you cannot boot the machine from the floppy drive. It may be that your machine needs service.
... JD Hurst
Posted: Wed Feb 22, 2006 1:54 pm
by yawnmoth
My machine was actually serviced not to long ago (the mobo - "planar" as they call it - was replaced)... is it possible that maybe the person doing the service changed some of the bios settings to better test it and forget to change them back?
Posted: Wed Feb 22, 2006 11:58 pm
by Kyocera
what happens when you remove the ethernet cable? will it boot at all.