How to backup OS to CD?

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
pschoggens
Posts: 19
Joined: Tue Feb 21, 2006 1:21 am
Location: So Ca

How to backup OS to CD?

#1 Post by pschoggens » Fri Feb 24, 2006 1:31 am

Hi again,


While reading the EULA for windows agreement, I learned it was OK for me to burn one copy of the OS for personal reinstall use and since there is little saved info on my HD, now would be the ideal time to do it....

But..but....how???????

Would you ever so kind individuals, puuleeeazzze give me the step by step instructions, so later I can light up a fresh HD with just the OS as it came the day it was new?


Look forward to your response

Powell
My first Notebook 8-)

marcos
Sophomore Member
Posts: 130
Joined: Wed Feb 22, 2006 7:53 pm

#2 Post by marcos » Fri Feb 24, 2006 5:18 pm

After you install Rescue and Recovery, you can create recovery disks from the program menu, or you're too lazy to dod that, call IBM/Lenovo and ask for a set of recovery CD because you want to be covered against hard drive failures. This is what I did because it's free and I like to have the original disks.

If you want to keep a copy of your current systems rather than IBM orginal one, you can do that as well. You will need a DVD burner at least, CD is of little use. You can compress your image partion on a DVD partion and make the disk dos-bootable, for example. You will need specialized software to do this, Norton Ghost is the first that comes to the mind.
T440s OK so far.
T420s NVIDIA graphics. Nice, then MB failure.
T400s Workhorse. two of'em, both faulty display with vertical stripes.
T43 °very nice° - MB reflown and dead, two of'em.
T42 15°, dead onboard wireless.
T40, dead memory slot, stolen from me
T30, stolen from me
TP600 dead

croooowe
Freshman Member
Posts: 56
Joined: Mon Feb 20, 2006 9:50 am

#3 Post by croooowe » Fri Feb 24, 2006 7:46 pm

Step by step? What system do you have and what version of Rescue and Recovery do you have installed? Even though you're making Factory Recovery Discs it still is often done from the Rescue and Recovery menu.

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#4 Post by GomJabbar » Fri Feb 24, 2006 8:03 pm

Assuming you have a late model ThinkPad with a CD burner, what you need is about 7 CD's to start. The program will only let you burn the CD's once, so use quality media and don't stop the process once started.

Go to Start > All Programs > ThinkVantage > Create Recovery Media > Create Recovery Discs.

If your ThinkPad is older, look in Start > All Programs > Access IBM > Create Recovery Discs.

Note that you can also Create Rescue Media (1 CD). This is not the same thing. This is for booting up to do a repair when you can't enter the Rescue and Recovery workspace or can't boot up windows.
DKB

bill bolton
Admin
Admin
Posts: 3848
Joined: Thu Sep 01, 2005 10:09 am
Location: Sydney, Australia - Best Address on Earth!

#5 Post by bill bolton » Fri Feb 24, 2006 9:17 pm

marcos wrote:because it's free
Only in some places and at some times.

Cheers,

Bill

marcos
Sophomore Member
Posts: 130
Joined: Wed Feb 22, 2006 7:53 pm

#6 Post by marcos » Fri Feb 24, 2006 9:31 pm

bill bolton wrote:
marcos wrote:because it's free
Only in some places and at some times.

Cheers,

Bill
Had been sent the disks twice (for two different systems) to argentina about 18 months aparts. Called thru the local access number, had a 3-yrs international warranty. They didn't made a fuss and even paid customs tax and duties on the invoice value of $8.33.
T440s OK so far.
T420s NVIDIA graphics. Nice, then MB failure.
T400s Workhorse. two of'em, both faulty display with vertical stripes.
T43 °very nice° - MB reflown and dead, two of'em.
T42 15°, dead onboard wireless.
T40, dead memory slot, stolen from me
T30, stolen from me
TP600 dead

croooowe
Freshman Member
Posts: 56
Joined: Mon Feb 20, 2006 9:50 am

#7 Post by croooowe » Fri Feb 24, 2006 10:03 pm

Also pschoggens, for the factory recovery discs it makes no difference how much junk you have on your system as it copies the preload material directly from your hidden service partition. You can make CD/DVD backups of your system with Rescue and Recovery all day long and each one of those is an entire backup of your system as it exists at that time. The Factory Restore CDs will re-start you off with the system/OS as it arrived from the factory.

d lehmann
Freshman Member
Posts: 90
Joined: Mon Dec 06, 2004 12:17 pm
Location: florida

#8 Post by d lehmann » Sat Feb 25, 2006 12:58 am

I preferr the factory disks too, but R&R gives you a choice at restore time to either go bare xp installation or with your latest setup and data.

croooowe
Freshman Member
Posts: 56
Joined: Mon Feb 20, 2006 9:50 am

#9 Post by croooowe » Sat Feb 25, 2006 2:19 am

The factory restore can only be done from the PDA and as long as your service partition is intact you don't even need discs as it can be run straight from the local drive. The discs are merely a (highly recommended) way of cya in case of total HDD failure. And of course to restore with "your latest setup and data" is assuming that you've kept your RnR backups up to date...

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 4 guests