Do laptop batteries require conditioning?

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
tghlk
Posts: 38
Joined: Tue Jul 04, 2006 10:19 pm
Location: NC

Do laptop batteries require conditioning?

#1 Post by tghlk » Tue Sep 26, 2006 9:02 am

I remember back in the old days of nickel metal hydride batteries, of telling users to fully discharge and recharge their laptop batteries if they were not holding a charge for very long. Supposedly that would increase their life.

What about the batteries used nowadays? Is it better to fully discharge and recharge them, or should they always remain fully charged?

I'm thinking that any discharge and recharge event will shorten battery life just a hair.

I have heard with lead-acid batteries, you never wanted to discharge them past 70% if possible, as that would shorten its life somewhat.

ambientscape
Junior Member
Junior Member
Posts: 411
Joined: Sat Jan 01, 2005 1:19 pm
Location: Petronas Twin Tower
Contact:

#2 Post by ambientscape » Tue Sep 26, 2006 11:00 am

Try to use the search option about this topic. It had been discussed many times. However, this link should give you sufficient information you need to know about batteries : www.batteryuniversity.com
-Thinkpad T23 1.2Ghz (2647-4RG) with Docking Station (2631)
-512MB RAM
-60GB Western Digital HDD
-3Com X-Jack Wireless A/B/G
-Imation External Combo DVD/CDRW
-Windows XP Pro SP2
-External 160GB Maxtor HDD

christopher_wolf
Special Member
Posts: 5741
Joined: Sat Oct 08, 2005 1:24 pm
Location: UC Berkeley, California
Contact:

#3 Post by christopher_wolf » Tue Sep 26, 2006 12:53 pm

LiIon batteries don't really have the same sensitivity, in terms of capacitive memory, that the older NiCads had. It was always best to fully cycle a NiCad for optimal lifespan. You don't have to do this with the LiIons that often and, when you do, it is because the battery gauge needs to be recalibrated on the controller for both the battery and the Thinkpad; moreso than just for the overall health of the battery. Having the gauge loose accuracy, if not calibrated in a deep cycle, could mean that you would be using the LiIon battery at non-optimal charging/use settings.

The battery itself doesn't, inherently, require such a deep cycle calibration, but it is good for the lifespan of it anyway because it helps the computer decide when and when not to slow charging and predict the time at which the battery will get full; it also increases the accuracy of the battery gauge, giving you a better operating time on battery.

HTH :)
IBM ThinkPad T43 Model 2668-72U 14.1" SXGA+ 1GB |IBM 701c

~o/
I met someone who looks a lot like you.
She does the things you do.
But she is an IBM.
/~o ---ELO from "Yours Truly 2059"

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 1 guest