Acronis TrueImage Did NOT Clone Hidden Partition!

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
phillyd2
Freshman Member
Posts: 54
Joined: Tue Aug 10, 2004 7:06 pm
Location: Philly, PA

Acronis TrueImage Did NOT Clone Hidden Partition!

#1 Post by phillyd2 » Sat Apr 07, 2007 3:53 pm

Using Acronis TrueImage 10 Home I just cloned a 40 GB HD to a new HITACHI 7K100 100 GB HD on my X31 and all went well and am very happy with the new drive. Acronis TrueImage worked well but the Hidden Partition was not copied and I no longer see the F11 option when booting.

Do I and/or should I care? I've never reloaded my system using the files on the hidden partition but I did like knowing it was there if it was ever needed.

I guess I can clone the 40 GB HD again but I did not see a option in Acronis TrueImage to include the hidden partition. What's the trick?

Is there a way to get it back or should I just forget about it and enjoy my new larger, faster, quieter drive?

bopchie
Freshman Member
Posts: 60
Joined: Fri Feb 23, 2007 12:21 am
Location: Mpls,Mn. USA
Contact:

#2 Post by bopchie » Sat Apr 07, 2007 4:43 pm

well the recovery partition is a hate it or like it thing....when i got my t43 i wiped the HDD as soon as i got it and installed my own OS (not sure if it even had the recovery partition to start with) but I say live without :D
T43 2687-ddu 1024MB, Vista Ultimate
TRU Admin www.TweaksRUs.com

vincentfox
Freshman Member
Posts: 106
Joined: Tue Dec 13, 2005 7:14 pm

#3 Post by vincentfox » Sat Apr 07, 2007 5:08 pm

Ditto. I hate the IBM pre-installs. Ever recover one off CD or the hidden partition? VERY SLOW!

Get an XP Pro SP2 OEM CD, install with the key off the bottom of the laptop. Run the IBM software installer to add in drivers and OSD stuff you will have a much better setup.

If you want a hidden partition to run backups to, Acronis can do that and I think it does a better quicker job.

I like the idea of the recovery CD's mainly if I want to Ebay the unit I can restore it to "factory" which makes it more marketable.
X23 866 MHz, 640-meg RAM, 40-gig Samsung MP0402H, and 3Com XJack WiFi

Kyocera
Moderator Emeritus
Moderator Emeritus
Posts: 4826
Joined: Wed Aug 10, 2005 8:00 pm
Location: North Carolina, ...in my mind I'm going to Carolina.....
Contact:

#4 Post by Kyocera » Sat Apr 07, 2007 6:26 pm

philly there is no trick every time I have cloned an ibm drive with HPA using acronis 9 it has cloned the entire drive perfectly (t30 and above except t40) and the machine is able to boot into the HPA with no problems. Maybe something has changed with or is different with Home 10?. Click the HD FAQ in my sig and read through that to see if maybe there is some info that will add to what you are trying to do.

phillyd2
Freshman Member
Posts: 54
Joined: Tue Aug 10, 2004 7:06 pm
Location: Philly, PA

#5 Post by phillyd2 » Sat Apr 07, 2007 6:35 pm

Kyocera wrote:philly there is no trick every time I have cloned an ibm drive with HPA using acronis 9 it has cloned the entire drive perfectly (t30 and above except t40) and the machine is able to boot into the HPA with no problems. Maybe something has changed with or is different with Home 10?. Click the HD FAQ in my sig and read through that to see if maybe there is some info that will add to what you are trying to do.
Actually it was those posts that inspired me to try cloning on my own :D

I read everything I could but could not find the answer to this issue.

phillyd2
Freshman Member
Posts: 54
Joined: Tue Aug 10, 2004 7:06 pm
Location: Philly, PA

#6 Post by phillyd2 » Sat Apr 07, 2007 9:04 pm

You guys are right. Anyway I do have the X31 Recovery CDs (which is the same as was on the hidden partition, right?) so I may as well leave well enough alone especially since I'm having no luck Cloning my X21 (see other post).

Puppy
Senior ThinkPadder
Senior ThinkPadder
Posts: 2264
Joined: Sat Oct 30, 2004 4:52 am
Location: Prague, Czech Republic

#7 Post by Puppy » Sun Apr 08, 2007 10:10 am

Have you checked both partitions ? See the screenshot http://members.chello.cz/petr/temp/TrueImageTPpart.jpg

phillyd2
Freshman Member
Posts: 54
Joined: Tue Aug 10, 2004 7:06 pm
Location: Philly, PA

#8 Post by phillyd2 » Sun Apr 08, 2007 10:40 am

Puppy wrote:Have you checked both partitions ? See the screenshot http://members.chello.cz/petr/temp/TrueImageTPpart.jpg
That's kind of the weird part. My original HD only showed ONE partition in XP's Disk Management and in Acronis TrueImage. However when I booted the old HD there was the F11 option which I no longer have. Before cloning I did hit F11 (just to see what's there) and up came a few icons letting me chose various restore options. After the clone I now only have the option to go into the bios.

Weird huh?

BTW, is that screenshot of Clone or Backup?

Puppy
Senior ThinkPadder
Senior ThinkPadder
Posts: 2264
Joined: Sat Oct 30, 2004 4:52 am
Location: Prague, Czech Republic

#9 Post by Puppy » Sun Apr 08, 2007 10:43 am

phillyd2 wrote:BTW, is that screenshot of Clone or Backup?
Backup

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 6 guests