Hibernation/Suspend Problems on X2* Thinkpads (maybe others)
Posted: Wed Jun 04, 2008 2:40 pm
(Note to moderators: I am posting this here because I think it may apply to other models as well. If you feel that is wrong you are welcome to move it to where ever you deem appropriate.)
My X24 suddenly would not go into hibernation. The Hibernation Tab was not available in the Power Management applet, and any attempt to turn hibernation back on, such as "powercfg -h on" resulted in a message "System does not support hibernation".
After searching the web, mucking around in the registry, and finally wiping the hard drive and doing a new install of Windows XP Professional with SP3 slipstreamed into it. I still did not have hibernation, nor suspend, as an option.
Looking through Lenovo's website I saw there was a newish version (2007) of the power management package available. After loading it Hibernation and Standby (I thought was called Suspend in the old package) were again available.
My conclusion was that on these older Thinkpads the Advanced Configuration and Power Interface (ACPI) is not firmware in the BIOS, but purely a software driver and thus subject to to corruption. So if you run into such a problem download the latest power management driver from Lenovo for your system and install it.
A note, reinstalling the old driver onto the running system did not fix the problem, but I (stupidly) did not try it from safe mode.
Hoping you never find this post useful,
Tom
My X24 suddenly would not go into hibernation. The Hibernation Tab was not available in the Power Management applet, and any attempt to turn hibernation back on, such as "powercfg -h on" resulted in a message "System does not support hibernation".
After searching the web, mucking around in the registry, and finally wiping the hard drive and doing a new install of Windows XP Professional with SP3 slipstreamed into it. I still did not have hibernation, nor suspend, as an option.
Looking through Lenovo's website I saw there was a newish version (2007) of the power management package available. After loading it Hibernation and Standby (I thought was called Suspend in the old package) were again available.
My conclusion was that on these older Thinkpads the Advanced Configuration and Power Interface (ACPI) is not firmware in the BIOS, but purely a software driver and thus subject to to corruption. So if you run into such a problem download the latest power management driver from Lenovo for your system and install it.
A note, reinstalling the old driver onto the running system did not fix the problem, but I (stupidly) did not try it from safe mode.
Hoping you never find this post useful,
Tom