R400 - internet stops working after 2 min. since start Vista

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

R400 - internet stops working after 2 min. since start Vista

#1 Post by zvonicek » Sat Dec 27, 2008 8:35 am

Hi,
On my new ThnkPad R400 with Vista, I have a problem with automatic connection to WiFi network. In Access Connections software, I set my home wireless network. When I switch on computer and go to internet, it is ok, but after about 2 minutes since start Vista, internet stops working. Ping is still OK to every site (google.com, yahoo.com,..), but I can't open any website. When I disconnect and then connect to the network, its all right until next computer startup.

I am very agonized, I tried to fix it many hours, but nothing helped.

Do you have any ideas ?


Thanks.

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#2 Post by GomJabbar » Sat Dec 27, 2008 8:53 am

I would try disabling IPV6 first. See the following two links.

http://support.microsoft.com/kb/929852

http://support.microsoft.com/kb/953944
DKB

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

#3 Post by zvonicek » Sat Dec 27, 2008 11:56 am

Thanks for your advice. However, it not really help. I disabled IPv6 according to manual and after reboot, internet connection stops working again. Problem must be somewhere else. :-(

It is mystery for me, why my computer doing this.. If you have some other ideas, I will be very grateful for it.

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

#4 Post by Harryc » Sat Dec 27, 2008 12:05 pm

I had a similar problem on my T400/Vista setup while using IE7. Try using Firefox as a test.

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

#5 Post by zvonicek » Sat Dec 27, 2008 12:10 pm

I am using Firefox and have this problem. I tried IE7 too, but problem was here also.
However it is curious, that you have this problem only in IE7.

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#6 Post by GomJabbar » Sat Dec 27, 2008 12:26 pm

You might try Tweak Test to see what it reports.
http://www.dslreports.com/tweaks

You can check for malware.
http://www.malwarebytes.org/mbam.php (you can download for free)

You can try repairing Winsock2.
http://support.microsoft.com/kb/811259

You could have a "Black Hole Router".
http://support.microsoft.com/kb/314825

You can Google "Black Hole Router" for more info.
DKB

Beaver
Sophomore Member
Posts: 171
Joined: Sat Oct 25, 2008 1:40 pm
Location: Brno, Czech Republic

#7 Post by Beaver » Sun Dec 28, 2008 12:45 am

And finally if nothing will help, you can uninstall the Wista :lol:
IBM T40p 2373-CG6, Pentium M 1.5 GHz, 1024 MB RAM, 40GB HDD, 14.1" TFT, ATI FireGL 9000 64 MB
Dual boot WinXP + Fedora Core 10

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

#8 Post by zvonicek » Sun Dec 28, 2008 6:03 am

Unfortunately, advices not help. I used System Restore to the date of first system startup and I still have this problem. So that I think, there it is a problem with preinstalled OS or with Access Connections software...

I turned off the automatic WiFi connection and I will be connecting to the network manually after Windows startup.

If you have any ideas or you had similar problem and solved it, please write me.

Thank you.

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

Re: R400 - internet stops working after 2 min. since start Vista

#9 Post by zvonicek » Wed Jan 07, 2009 9:18 am

I found one interesting thing. I used my notebook with one other WiFi AP and on it, everything was OK. After OS startup, There was no problem with internet connection. However, I haven't ever had a problem with my AP, so that, either is problem with Access Connections, or with my AP's configuration.

Do you have any idea, what could be set wrong in AP ?
ThinkPad R400 - 4733-C1G

RealBlackStuff
Admin
Admin
Posts: 17517
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: R400 - internet stops working after 2 min. since start Vista

#10 Post by RealBlackStuff » Wed Jan 07, 2009 12:16 pm

Why don't you disable Access Connections and let Windows manage your connection?
You'll need to start the Zero Config service first in Start/Run/services.msc
Works all the time for me...
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

Re: R400 - internet stops working after 2 min. since start Vista

#11 Post by zvonicek » Sat Jan 10, 2009 10:22 am

RealBlackStuff wrote:Why don't you disable Access Connections and let Windows manage your connection?
You'll need to start the Zero Config service first in Start/Run/services.msc
Works all the time for me...
Thanks for advice. Unfortunately, it still didn't not help. I permanently stopped Access Connections in services.msc and restarted OS. After reboot, I have same problem again. Access Connections was surely disabled (Fn+F5 didn't working)...

It is possible that it's a hardware problem ?
ThinkPad R400 - 4733-C1G

zvonicek
Posts: 8
Joined: Sat Aug 23, 2008 1:19 am
Location: Zlin, Czech Republic
Contact:

Re: R400 - internet stops working after 2 min. since start Vista

#12 Post by zvonicek » Tue Feb 17, 2009 11:41 am

I solved my connection drop problem !! I have updated Wi-Fi drivers and now everything is OK. :D

Complete instructions are here: http://forum.thinkpads.com/viewtopic.ph ... 86#p471886
ThinkPad R400 - 4733-C1G

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: USSS and 2 guests