Page 1 of 1
R400 - internet stops working after 2 min. since start Vista
Posted: Sat Dec 27, 2008 8:35 am
by zvonicek
Hi,
On my new ThnkPad R400 with Vista, I have a problem with automatic connection to WiFi network. In Access Connections software, I set my home wireless network. When I switch on computer and go to internet, it is ok, but after about 2 minutes since start Vista, internet stops working. Ping is still OK to every site (google.com, yahoo.com,..), but I can't open any website. When I disconnect and then connect to the network, its all right until next computer startup.
I am very agonized, I tried to fix it many hours, but nothing helped.
Do you have any ideas ?
Thanks.
Posted: Sat Dec 27, 2008 8:53 am
by GomJabbar
Posted: Sat Dec 27, 2008 11:56 am
by zvonicek
Thanks for your advice. However, it not really help. I disabled IPv6 according to manual and after reboot, internet connection stops working again. Problem must be somewhere else.
It is mystery for me, why my computer doing this.. If you have some other ideas, I will be very grateful for it.
Posted: Sat Dec 27, 2008 12:05 pm
by Harryc
I had a similar problem on my T400/Vista setup while using IE7. Try using Firefox as a test.
Posted: Sat Dec 27, 2008 12:10 pm
by zvonicek
I am using Firefox and have this problem. I tried IE7 too, but problem was here also.
However it is curious, that you have this problem only in IE7.
Posted: Sat Dec 27, 2008 12:26 pm
by GomJabbar
You might try Tweak Test to see what it reports.
http://www.dslreports.com/tweaks
You can check for malware.
http://www.malwarebytes.org/mbam.php (you can download for free)
You can try repairing Winsock2.
http://support.microsoft.com/kb/811259
You could have a "Black Hole Router".
http://support.microsoft.com/kb/314825
You can Google "Black Hole Router" for more info.
Posted: Sun Dec 28, 2008 12:45 am
by Beaver
And finally if nothing will help, you can uninstall the Wista

Posted: Sun Dec 28, 2008 6:03 am
by zvonicek
Unfortunately, advices not help. I used System Restore to the date of first system startup and I still have this problem. So that I think, there it is a problem with preinstalled OS or with Access Connections software...
I turned off the automatic WiFi connection and I will be connecting to the network manually after Windows startup.
If you have any ideas or you had similar problem and solved it, please write me.
Thank you.
Re: R400 - internet stops working after 2 min. since start Vista
Posted: Wed Jan 07, 2009 9:18 am
by zvonicek
I found one interesting thing. I used my notebook with one other WiFi AP and on it, everything was OK. After OS startup, There was no problem with internet connection. However, I haven't ever had a problem with my AP, so that, either is problem with Access Connections, or with my AP's configuration.
Do you have any idea, what could be set wrong in AP ?
Re: R400 - internet stops working after 2 min. since start Vista
Posted: Wed Jan 07, 2009 12:16 pm
by RealBlackStuff
Why don't you disable Access Connections and let Windows manage your connection?
You'll need to start the Zero Config service first in Start/Run/services.msc
Works all the time for me...
Re: R400 - internet stops working after 2 min. since start Vista
Posted: Sat Jan 10, 2009 10:22 am
by zvonicek
RealBlackStuff wrote:Why don't you disable Access Connections and let Windows manage your connection?
You'll need to start the Zero Config service first in Start/Run/services.msc
Works all the time for me...
Thanks for advice. Unfortunately, it still didn't not help. I permanently stopped Access Connections in services.msc and restarted OS. After reboot, I have same problem again. Access Connections was surely disabled (Fn+F5 didn't working)...
It is possible that it's a hardware problem ?
Re: R400 - internet stops working after 2 min. since start Vista
Posted: Tue Feb 17, 2009 11:41 am
by zvonicek
I solved my connection drop problem !! I have updated Wi-Fi drivers and now everything is OK.
Complete instructions are here:
http://forum.thinkpads.com/viewtopic.ph ... 86#p471886