r32 and r40e swap parts

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
sonspot
Posts: 7
Joined: Sat Aug 22, 2009 7:17 pm
Location: Windsor, ON Canada

r32 and r40e swap parts

#1 Post by sonspot » Sat Aug 29, 2009 7:33 pm

hi there, i have a broken r32 and a incomplete r40e. my question is will the battery from the r32 fit the r40e (i check a few sites and they say yes but its not fitting for me), what is the voltage and amp for the battery,. lastly can i swap the lcd, (use the inverter from the r40e with the r32 lcd)... am looking for a fan with heat sink too.

thanks

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15740
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

Re: r32 and r40e swap parts

#2 Post by ajkula66 » Sat Aug 29, 2009 9:36 pm

The battery from R32 will fit R40 but not R40e.

Not sure about the fan. Open it up and take a look.

LCD should work.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: T61p

PMs requesting personal tech support will be ignored.

sonspot
Posts: 7
Joined: Sat Aug 22, 2009 7:17 pm
Location: Windsor, ON Canada

Re: r32 and r40e swap parts

#3 Post by sonspot » Sat Aug 29, 2009 11:41 pm

thanks for the reply, i took them apart already, i swapped the lcd but forgot to ram in the unit, so i swapped it back but i think the lcd will work,. the fan NO :( ,.. just picked up a 15" r40 with a fan :D , i'll see if i can swap the things around in the 15" if the screen is good.. lots of fun, i dont mind ripping them apart, just dont like it when i have screws left over :eek:

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 5 guests