Page 1 of 1
Installing new DVD drive
Posted: Sat Apr 02, 2005 6:12 am
by NipplesTheCat
So I just got my first new used thinkpad yesterday and I am loving it so far. It came with a toshiba DVD rom that i have in right now and am currently playing a dvd on. The problem is that it doesnt have a face on it like the cd rom had. It just has a plate one the front that says for transportation purposes only. Am I supposed to take the front off of the cd rom drive as I did with the rails? If so then how do i get it off without breaking it? Thanks.
Posted: Sat Apr 02, 2005 10:26 am
by AlphaKilo470
Leave the faceplate on the Cd drive. The DVD drive was most likely from a 3rd party vendor who did the front differently than IBM.
Posted: Sat Apr 02, 2005 4:01 pm
by NipplesTheCat
Its a Toshiba drive that doesnt have a faceplate on it at all. Any thoughts?
Posted: Sat Apr 02, 2005 4:07 pm
by AlphaKilo470
Yeah, this is a common thing with aftermarket and non-oem parts. It could also be a drive from another laptop that was modified to fit in the ThinkPad.
Posted: Sun Apr 03, 2005 3:26 am
by NipplesTheCat
So what do I do then?
Posted: Sun Apr 03, 2005 8:18 am
by MadeInJapan
Nipples...see if you can find any part number on the drive in question and post it here. BTW, which Thinkpad are you trying to use this with? Actually, more than that, I need to know what type of bay you're trying to get this to fit.....Ultrabay, Ultrabay2000, Utrabay Slim, etc.
I think that with more specific info, we might be able to help you with an alternative that would work for your Thinkpad.
Posted: Sun Apr 03, 2005 4:38 pm
by NipplesTheCat
Well its a A22m and the drive is a a Toshiba sd-c2502. Im not sure what bay is what but it goes where the old 24x cd rom went (right hand side by the pcmcia slot).
Posted: Tue Apr 05, 2005 7:24 am
by NipplesTheCat
its an ultrabay 2000 I think
Posted: Tue Apr 05, 2005 8:30 am
by carbon_unit
What brand is the old CD drive, there should be a sticker on the bottom. If it is the same brand there is a chance the faceplate will interchange.
Posted: Tue Apr 05, 2005 10:32 am
by MadeInJapan
Ah, the SD-C2502! If others can't help you, I found this,
(
http://www.ultradrives.com/product_info ... cts_id/201 ) but if it's for the Ultrabay2000, then you'll have to cut part of the faceplate...not really any big deal...done it to several.
But as far as this drive goes, it has a very good reputation and is very easily RPC-1 (Region-Free) upgradable. Go here to see your options:
http://forum.rpc1.org/dl_firmware.php?download_id=241
Posted: Thu Apr 07, 2005 7:38 am
by NipplesTheCat
ah yes thanks. thats looks like what im looking for. ill just have to cut the corner down a little bit. thanks
Posted: Thu Apr 07, 2005 8:00 pm
by MadeInJapan
No problem....glad to be of service, esp. to someone with a name like yours....LOL.