How to start creating recovery discs?
How to start creating recovery discs?
I just received my W520. I've logged in, created my password and fingerprints, set the time zone etc, and it tried to start installing Norton which I killed.
Simple question: What program (or ??) do I use to make my recovery discs and how do I start it?
The closest thing I find is in ThinkVantage Toolbox where there is:
"Enhanced Backup and Restore > Backup Solution: ThinkVantage Rescue and Recovery > Install Rescue and Recovery" (other option: Purchase Backup Drive)
Is this what I use? I got a little spooked on the "Install Rescue and Recovery" as though it might ask for media to do an R&R.
Related (or maybe not): I was going to hold off on swapping out the one factory stick of 4GB RAM with the new 4 x 4GB @1600 until after I create the recovery media. Is this the recommended sequence?
Thanks!
BTW, I search all over the TP forum and at Lenovo but I couldn't find the answer to this seemingly simple question. Most of the threads were about having lost the media or not having a CD/DVD drive (which I have). And ThinkVantage Help is no help . . . .
Simple question: What program (or ??) do I use to make my recovery discs and how do I start it?
The closest thing I find is in ThinkVantage Toolbox where there is:
"Enhanced Backup and Restore > Backup Solution: ThinkVantage Rescue and Recovery > Install Rescue and Recovery" (other option: Purchase Backup Drive)
Is this what I use? I got a little spooked on the "Install Rescue and Recovery" as though it might ask for media to do an R&R.
Related (or maybe not): I was going to hold off on swapping out the one factory stick of 4GB RAM with the new 4 x 4GB @1600 until after I create the recovery media. Is this the recommended sequence?
Thanks!
BTW, I search all over the TP forum and at Lenovo but I couldn't find the answer to this seemingly simple question. Most of the threads were about having lost the media or not having a CD/DVD drive (which I have). And ThinkVantage Help is no help . . . .
W520 4270-CTO 15.6"HD+ i7-2720QM 16GB@1600MHz 500GB@7200 Quadro 2000M, Win7 64
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
Re: How to start creating recovery discs?
Don't have experience with W520, but on some Thinkpads I've had, there should be a start menu item somewhere under Thinkvantage, called "Create Rescue Media" or "Recovery Media" or something like that. Perhaps you need to have R&R installed for that, not sure.
Current: X220 4291-4BG, T410 2537-R46, T60 1952-F76, T60 2007-QPG, T42 2373-F7G
Collectibles: T430s (IPS FHD + Classic Keyboard), X32 (IPS Screen)
Retired: X61 7673-V2V, A31p w/ Ultrabay Numpad
Past: Z61t 9440-A23, T60 2623-D3U, X32 2884-M5U
Collectibles: T430s (IPS FHD + Classic Keyboard), X32 (IPS Screen)
Retired: X61 7673-V2V, A31p w/ Ultrabay Numpad
Past: Z61t 9440-A23, T60 2623-D3U, X32 2884-M5U
Re: How to start creating recovery discs?
One other thing that came up: after I made this initial post and was getting ready to shut down (hoping for some TP'ers comments) there was a warning "x" on an icon in the lower right footer bar that had a message that Windows wanted to do (setup?) a backup. I clicked on it and it wanted to write to Q: drive and the routine only talked about hard drives, not CDs or DVDs. I'm guessing this is more of a typical backup that Windows is encouraging and not the R & R media.
W520 4270-CTO 15.6"HD+ i7-2720QM 16GB@1600MHz 500GB@7200 Quadro 2000M, Win7 64
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
Re: How to start creating recovery discs?
you can swap out the ram whenever you want. if you just want to get it out of the way, do it now. it doesn't have any effect on the recovery media.antelope wrote:Related (or maybe not): I was going to hold off on swapping out the one factory stick of 4GB RAM with the new 4 x 4GB @1600 until after I create the recovery media. Is this the recommended sequence?
Re: How to start creating recovery discs?
Thanks to dr_st for getting me pointed in the right direction.
Instead of going for the too apparent ThinkVantage Toolbox icon in the bottom bar toward the right, I instead went to the lower left Start button > Programs > Lenovo ThinkVantage Tools. Within that is Factory Recovery Disks. This is what I was looking for. It says it needs a CD for the first disk but a DVD seemed to work fine.
(BTW, there seem to be a lot of junk programs for a new computer that purportedly only had Win7 installed . . . . )
Instead of going for the too apparent ThinkVantage Toolbox icon in the bottom bar toward the right, I instead went to the lower left Start button > Programs > Lenovo ThinkVantage Tools. Within that is Factory Recovery Disks. This is what I was looking for. It says it needs a CD for the first disk but a DVD seemed to work fine.
(BTW, there seem to be a lot of junk programs for a new computer that purportedly only had Win7 installed . . . . )
W520 4270-CTO 15.6"HD+ i7-2720QM 16GB@1600MHz 500GB@7200 Quadro 2000M, Win7 64
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
T60p 2623-8YU 14.1" SXGA+ || T42 2379 DXU 15" SXGA+
"The best things in life aren't things"
-
- Similar Topics
- Replies
- Views
- Last post
-
-
At which series level did this t series start coming with W7 Restore Discs?
by fefrie » Fri Apr 21, 2017 10:35 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 2 Replies
- 684 Views
-
Last post by w0qj
Sat Apr 22, 2017 5:18 am
-
-
-
Thinkpad 770X recovery with 770Z discs?
by rheacox » Thu Jan 05, 2017 12:46 pm » in ThinkPad Legacy Hardware - 5 Replies
- 997 Views
-
Last post by fultontech
Thu Jan 05, 2017 5:20 pm
-
-
-
Windows 7 Pro recovery discs for T420s ?
by ulrich.von.lich » Sun Feb 19, 2017 4:00 am » in ThinkPad T400/410/420 and T500/510/520 Series - 5 Replies
- 1010 Views
-
Last post by ji2o0k
Wed Feb 22, 2017 9:56 am
-
-
-
Closed: Vista Business recovery discs for X61t
by fultontech » Sat Mar 18, 2017 9:36 pm » in Marketplace - Forum Members only - 0 Replies
- 198 Views
-
Last post by fultontech
Sat Mar 18, 2017 9:36 pm
-
Who is online
Users browsing this forum: No registered users and 7 guests




