Is it able to go to BIOS settings (or press Esc and you can see the POST messages)?mbguy wrote: ↑Sat Mar 30, 2019 3:27 pmI have an IBM T41 that lights up to the logo screen when the power button is pushed. About 20-30 seconds after the picture goes out. The screen is not black because you can still see light but the picture goes away and it will not finish it's post. No beeping, just loss of picture. Not sure what the problem could be. The tube is good as there is light, and I've changed the inverter but have the same problem. Any help appreciated.
I would say try disconnecting all devices (USB drives, HDD, Ultrabay device) and try fiddling with the CMOS battery, RAM and CPU and see if you can get anything.
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Lat D830 X9000 8gb 128gb WSXGA+ Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
- Admin Emeritus
- Posts: 21016
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Dublin, Éire
Just in case, if you have a 14.1" T41, I have some spare lids with LCD for that.
Check out The Boardroom for Parts, Mods and Other Services.
"Computers don't lie, but liars can compute." (Terry Hayes's I Am Pilgrim)
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 14 guests