T43: Fan and error 2010 solved?

Message

NeoteriX · #31 Post by **NeoteriX** » Thu Dec 01, 2005 1:31 am

Heh, how in the world do you hit 33 degrees on the T43 at normal room temperature?! That's insane

My TP maybe starts at 33 when it'ss been off and in a cold place...

christopher_wolf · #32 Post by **christopher_wolf** » Thu Dec 01, 2005 1:33 am

I have started out at around 31 Degrees and hit 33 Degrees easily; depends on the ambient temperature (colder is better) and how it started up (a resume from suspend or hibernate won't add as much heat as a full boot would).

zane · #33 Post by **zane** » Thu Dec 01, 2005 11:18 am

Before update, starts at 50C and rises to 52C.
After update, starts at 39C and rises to 45C(fan kicks at 44C).
The fan noise is same.
The ambient temperature is about 24C. CPU voltage is set to 0.7V.

christopher_wolf · #34 Post by **christopher_wolf** » Thu Dec 01, 2005 11:32 am

Is this when you are plugged in or on battery? Before, I used to startup around 37 Degrees; afterwards, it has gone down to 35 Degrees.

ninecup · #35 Post by **ninecup** » Thu Dec 01, 2005 1:55 pm

This sounds very good.

zane wrote:Before update, starts at 50C and rises to 52C.
After update, starts at 39C and rises to 45C(fan kicks at 44C).
The fan noise is same.
The ambient temperature is about 24C. CPU voltage is set to 0.7V.

T43: Fan and error 2010 solved?

Who is online