2378-FVU motherboard compatibility

T4x series specific matters only
Post Reply
Message
Author
rsayyid
Posts: 2
Joined: Wed Jun 14, 2006 5:43 am
Location: London

2378-FVU motherboard compatibility

#1 Post by rsayyid » Wed Jun 14, 2006 1:09 pm

I wish I had heard of this forum a couple of weeks ago.
The motherboard on my T42 is fried and needs to be replaced. It's the same symptoms I've read many posts about, the laptop freezes when you touch or move it. It's out of warranty, so I guess I'm going to have to go ahead and replace the motherboard myself.

My question is about compatible motherboards. Can I just pick any motherboard for a T4x series computer and install it? Or are there certain specs that I need to look at?

I am mainly looking at these two motherboards off of ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 6890610225
and
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 6891630117

Your guidance is highly appreciated.

EOMtp
ThinkPadder
ThinkPadder
Posts: 1583
Joined: Fri May 19, 2006 12:51 pm

#2 Post by EOMtp » Thu Jun 15, 2006 3:12 am

Any T40/T41/T42 motherboard will work and both of the motherboards you show will work.

T43 motherboards will fit but will NOT work with your other components from the old board (e.g., memory, processor, PC Card slot).

Note that not all motherboards can accept all Pentium-M processors. You should make certain that your processor can run on the motherboard that you select. The issue is the FSB (Front Side Bus) speed of the processor vs. the motherboard.

Also make sure that the memory you have can run on the motherboard you select.

brentpresley
ThinkPadder
ThinkPadder
Posts: 1434
Joined: Fri Dec 23, 2005 4:19 pm
Location: Dallas, TX
Contact:

#3 Post by brentpresley » Thu Jun 15, 2006 6:27 am

EOMtp wrote:Any T40/T41/T42 motherboard will work and both of the motherboards you show will work.

T43 motherboards will fit but will NOT work with your other components from the old board (e.g., memory, processor, PC Card slot).

Note that not all motherboards can accept all Pentium-M processors. You should make certain that your processor can run on the motherboard that you select. The issue is the FSB (Front Side Bus) speed of the processor vs. the motherboard.

Also make sure that the memory you have can run on the motherboard you select.
Not true. The processor will work just in fine in a T43 board.
Custom T60p
2.33GHz 4MB 667MHz Core 2 Duo
4GB PC2-5300 DDR SDRAM
Bluetooth / Atheros ABGN
200GB 7k200 7200RPM Hard Drive
8X DVD Multiburner
15" UXGA - ATI FireGL V5250 (256MB)

http://www.xcpus.com

cmarti
ThinkPadder
ThinkPadder
Posts: 1935
Joined: Sun Feb 12, 2006 1:26 am
Location: Orlando, Florida
Contact:

#4 Post by cmarti » Thu Jun 15, 2006 8:59 am

brentpresley wrote:
EOMtp wrote:Any T40/T41/T42 motherboard will work and both of the motherboards you show will work.

T43 motherboards will fit but will NOT work with your other components from the old board (e.g., memory, processor, PC Card slot).

Note that not all motherboards can accept all Pentium-M processors. You should make certain that your processor can run on the motherboard that you select. The issue is the FSB (Front Side Bus) speed of the processor vs. the motherboard.

Also make sure that the memory you have can run on the motherboard you select.
Not true. The processor will work just in fine in a T43 board.
Yes but only at 400FSB reducing the speed of the processor. But it will work.
X32/2.0GHZ/2GB/ENGENIUS EMP-8602+S 600mw mini pci/WD 250GB
X60/1.83GHZ/2GB/Atheros/7K100

jhonyl
Sophomore Member
Posts: 171
Joined: Sun Feb 27, 2005 9:13 pm

#5 Post by jhonyl » Thu Jun 15, 2006 4:31 pm

How about a Core Duo motherboard? Will that fit in the box? (I know - it will need new memory and CPU, and maybe HD too? Is it SATA on the new boards?)
T42 2378FVU Pentium M 735(1.7Ghz), 768MB, 14.1" SXGA+, 40GB, ATI Mobility Radeon 9600

EOMtp
ThinkPadder
ThinkPadder
Posts: 1583
Joined: Fri May 19, 2006 12:51 pm

#6 Post by EOMtp » Thu Jun 15, 2006 5:28 pm

It is SATA + it will NOT fit.

cmarti
ThinkPadder
ThinkPadder
Posts: 1935
Joined: Sun Feb 12, 2006 1:26 am
Location: Orlando, Florida
Contact:

#7 Post by cmarti » Fri Jun 16, 2006 9:01 am

jhonyl wrote:How about a Core Duo motherboard? Will that fit in the box? (I know - it will need new memory and CPU, and maybe HD too? Is it SATA on the new boards?)
No duo processors will work in any T4x laptop..
Different chipset
Sorry..
X32/2.0GHZ/2GB/ENGENIUS EMP-8602+S 600mw mini pci/WD 250GB
X60/1.83GHZ/2GB/Atheros/7K100

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 21 guests