Someone help me figure out what I'm seeing
Someone help me figure out what I'm seeing
I have a T41 (2373-311) and I've been reading through this board but I can't find anyone with a similar problem and thought I'd post.
I was having a problem with Windows freezing, so I reinstalled XP Pro SP2 thinking it was a bad driver or something. The problem I see is this:
Shortly after power on, but at random intervals, the system just freezes and the screen goes fuzzy whenever I try to move the mouse. If I power cycle (cold boot), the screen doesn't show anything and the drive light never flashes. I will repeat this process about 4 or 5 times, and it will then boot up just fine and work with no problems for about 5-10 minutes and then starts the whole process all over again.
I smelled the fan and it smells a little burned. A few times I booted to get the Fan Error message, but that's only happened a few times. Is it the laptop overheating?
I'm running NHC and am underclocking and undervolting to .965 and 600mhz. All monitors look to be fine so I can't see that there are any heat issues, but I'm guessing at this point it might be the planar issue.
Can someone help me try to determine what's happening here? I also can't find the part number for my fan. The matrix on the IBM/Lenovo sight doesn't show a replacement fan part number for a 2373-311, so I'm losing my options here.
Thanks in advance,
Jesse
I was having a problem with Windows freezing, so I reinstalled XP Pro SP2 thinking it was a bad driver or something. The problem I see is this:
Shortly after power on, but at random intervals, the system just freezes and the screen goes fuzzy whenever I try to move the mouse. If I power cycle (cold boot), the screen doesn't show anything and the drive light never flashes. I will repeat this process about 4 or 5 times, and it will then boot up just fine and work with no problems for about 5-10 minutes and then starts the whole process all over again.
I smelled the fan and it smells a little burned. A few times I booted to get the Fan Error message, but that's only happened a few times. Is it the laptop overheating?
I'm running NHC and am underclocking and undervolting to .965 and 600mhz. All monitors look to be fine so I can't see that there are any heat issues, but I'm guessing at this point it might be the planar issue.
Can someone help me try to determine what's happening here? I also can't find the part number for my fan. The matrix on the IBM/Lenovo sight doesn't show a replacement fan part number for a 2373-311, so I'm losing my options here.
Thanks in advance,
Jesse
I had the same exact problem two years ago. I called the local dealer to ask for some advise and he instantly said "bring the laptop in". Apparently it was a well known problem with T41 2373 motherboards that had faulty gpu chips that caused overheating-fan failure-board failure, or so I have been told.
T41 2373-2FG, X60s 1702-5PG, X61s 7666-C46
-
mitchellst
- Sophomore Member
- Posts: 142
- Joined: Thu Feb 01, 2007 7:46 pm
- Location: marietta, ga
-
mitchellst
- Sophomore Member
- Posts: 142
- Joined: Thu Feb 01, 2007 7:46 pm
- Location: marietta, ga
The way they list the parts for each unit is strange.
For your unit, 2373-311, it shows both on the master list of parts. I'm not 100% positive that both will work, but I believe that they will (otherwise, they shouldn't list it in the parts index).
I recommend getting whatever is in your unit now. I suspect it's the long fan (seems like it usually is for some reason). You can check by removing the keyboard. The short fan will only provide heat dissipation for the CPU. I believe the long fan extends out over some other components as well. Like I said... I believe both will work, but you may as well replace it with the same part...
On second thought, if you're having overheating problems, you may want to try the long fan either way.
You should be able to replace the fan without removing anything but the keyboard (and the fan... obviously). You "may" have to remove the palmrest too, but I don't believe so. The part number should be on it somewhere.
If it was under warranty, I'd vote that you send it in so that you can get your motherboard replaced too, but since it's not, trying the fan first is definitely the cheaper option. I've seen T40/41/42 motherboards on ebay for around $250, but if you go to a store, they will charge more like $450 plus labor.
For your unit, 2373-311, it shows both on the master list of parts. I'm not 100% positive that both will work, but I believe that they will (otherwise, they shouldn't list it in the parts index).
I recommend getting whatever is in your unit now. I suspect it's the long fan (seems like it usually is for some reason). You can check by removing the keyboard. The short fan will only provide heat dissipation for the CPU. I believe the long fan extends out over some other components as well. Like I said... I believe both will work, but you may as well replace it with the same part...
On second thought, if you're having overheating problems, you may want to try the long fan either way.
You should be able to replace the fan without removing anything but the keyboard (and the fan... obviously). You "may" have to remove the palmrest too, but I don't believe so. The part number should be on it somewhere.
If it was under warranty, I'd vote that you send it in so that you can get your motherboard replaced too, but since it's not, trying the fan first is definitely the cheaper option. I've seen T40/41/42 motherboards on ebay for around $250, but if you go to a store, they will charge more like $450 plus labor.
Thanks for the tip. As long as the fan bay is long enough to accommodate the long fan, I would guess that it would be the better choice for my system. The only thing I wonder is, is there any way to definitively determine that its the GPU and not broken planar solder points as others have mentioned have been notorious problems for the T41's? Are there some tests that I can run to put the thing through its paces?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
How can I find out if I can run Win10 or Win 7 on this T60?
by Muse » Sat Jan 07, 2017 10:29 am » in ThinkPad T6x Series - 15 Replies
- 2261 Views
-
Last post by sebileis2017
Thu Mar 09, 2017 11:24 am
-
-
-
Can I simply swap out my T5500 CPU in my 1953CTO T60 with a T5600? Or my T2400 core duo in my 2623D6U T60?
by Muse » Mon Apr 24, 2017 12:37 pm » in ThinkPad T6x Series - 4 Replies
- 723 Views
-
Last post by Muse
Mon Apr 24, 2017 7:22 pm
-
-
-
T430 display freaking out
by zv45beta » Sun May 14, 2017 2:55 pm » in ThinkPad T430/T530 and later Series - 4 Replies
- 178 Views
-
Last post by Thinkpad4by3
Mon May 15, 2017 7:35 am
-
-
-
Intel ME exploit patch for xx30 systems is being rolled out
by n4ru » Mon May 22, 2017 10:19 am » in ThinkPad T430/T530 and later Series - 0 Replies
- 129 Views
-
Last post by n4ru
Mon May 22, 2017 10:19 am
-
Who is online
Users browsing this forum: No registered users and 5 guests



