Temperature reading with different Embedded Controller ver.

Message

gunston · #1 Post by **gunston** » Mon Apr 23, 2007 10:55 pm

CPU 54 (0x78)
APS 57(0x79)
PCM 49(0x7a)
GPU 56(0x7b)
BAT 38 (0x7c)
BAT 31 (0x7e)
BUS 52 (0xc0)
PCI 55 (0xc1)
PWR 54 (0xc2)

Embedded controller 1.06

CPU 54 (0x78)
APS 52 (0x79)
PCM 42 (0x7a)
GPU 51 (0x7b)
BAT 38 (0x7c)
BAT 31 (0x7e)
BUS 49 (0xc0)
PCI 51 (0xc1)
PWR 51 (0xc2)

Embedded controller 1.03

if this is the case then, i would stick with 1.03...

mattster · #2 Post by **mattster** » Tue Apr 24, 2007 1:22 pm

Interesting find ..... is this on the T43 in your signature?

gunston · #3 Post by **gunston** » Tue Apr 24, 2007 5:15 pm

mattster, yes

MartinB · #4 Post by **MartinB** » Sun Apr 29, 2007 2:48 pm

Just wondering... isn't the latest version 3.04?

Wiz · #5 Post by **Wiz** » Sun Apr 29, 2007 3:34 pm

MartinB wrote:Just wondering... isn't the latest version 3.04?

The latest for T43 is 1.06.

gunston: According to the release notes from IBM/Lenovo BIOS version 1.25 or newer require either embedded controller 1.05 or 1.06. Did you also revert back to BIOS version 1.24 that is supported to use with embedded controller 1.03 or do you still use the latest BIOS that require embedded controller 1.06 according to the release notes?

gunston · #6 Post by **gunston** » Sun Apr 29, 2007 5:46 pm

CPU 38癈 (0x78)
APS 38癈 (0x79)
PCM 32癈 (0x7a)
GPU 39癈 (0x7b)
BAT 31癈 (0x7c)
BAT 29癈 (0x7e)
BUS 36癈 (0xc0)
PCI 38癈 (0xc1)
PWR 40癈 (0xc2)

temperature reading for version 1.6 and 1.20 BIOS

Temperature reading with different Embedded Controller ver.

Temperature reading with different Embedded Controller ver.

Who is online