UJ-842 DVD-RW problem

T4x series specific matters only
Post Reply
Message
Author
IYS
Posts: 7
Joined: Sun May 06, 2007 8:41 pm
Location: Melbourne, Australia

UJ-842 DVD-RW problem

#1 Post by IYS » Wed Oct 03, 2007 9:44 pm

I'm having problems with the DVD burner that I bought for my T42 thinkpad. The model of the dvd burner is UJ-842 (manufactured JUNE 2007. REV 201).

The problem is burning seems to always fail at the same point (between 30%-40%). The DVD blanks that I am using are Ritek G05 8x.

The advertised speed for the drive was 8x for DVD-R media, however it doesnt seem to be doing this as the maximum speed I can select is 2x.

I have restored factory settings on the T42 (reinstalled windows) and it did not fix the problem.

Anyone know what the problem could be?

rbena
Sophomore Member
Posts: 223
Joined: Thu May 11, 2006 6:09 pm
Location: New Zealand

Re: UJ-842 DVD-RW problem

#2 Post by rbena » Wed Oct 03, 2007 9:53 pm

I'm guessing it is the media rather than the drive. Try Verbatim disks and see if you have the same problem.

My UJ842 drops to 2x speed when burning off-brand media. I mainly use Verbatim as always get 8x speed and rarely have a failed disk.
T42__1.8 / 160GB-5400 / 1GB / ATI7500
T42__1.5 / 160GB-5400 / 1.2GB / ATI7500
600e__PII-400 / 40G-5400 /0.5GB

syedj
Senior Member
Senior Member
Posts: 712
Joined: Thu Jul 13, 2006 8:54 am
Location: Nashua, New Hampshire

#3 Post by syedj » Wed Oct 03, 2007 10:47 pm

I would also suggest trying some different media. Don't buy a whole new spindle try to borrow one or two discs of some different brand from someone else and try them.
“Long you live and high you'll fly and smiles you'll give and tears you'll cry and all you touch and all you see is all your life will ever be.”

IYS
Posts: 7
Joined: Sun May 06, 2007 8:41 pm
Location: Melbourne, Australia

#4 Post by IYS » Mon Oct 08, 2007 7:11 am

yeah you guys were right... I bought a spindle of Verbatim DVD-R's (16X speed) and now the UJ-842 writes at 8x speed perfectly with no problems at all.

Is there a way to fix this i.e any firmware update available?

I did like the ritek DVD-R's as I had been using them for years with no problems and they are around $10 cheaper than Verbatim per spindle (Ritek $14 AUD Vs Verbatim $24 AUD).

How is the quality of Verbatim vs Ritek? does the extra $10 for the verbatim equal to better quality?

Well thanks both rbena and syedj for your suggestions.

rbena
Sophomore Member
Posts: 223
Joined: Thu May 11, 2006 6:09 pm
Location: New Zealand

Re: UJ-842 DVD-RW problem

#5 Post by rbena » Mon Oct 08, 2007 5:56 pm

The Ritek's may be cheaper, but I've never had a problem retrieving data that I've backed up to Verbatim DVD's. That to me is worth the extra cost.

For non-critical use, you may find cheaper DVD's that will burn at 8x. The ones I've found were not much cheaper than the Verbatim's I purchase in bulk.
T42__1.8 / 160GB-5400 / 1GB / ATI7500
T42__1.5 / 160GB-5400 / 1.2GB / ATI7500
600e__PII-400 / 40G-5400 /0.5GB

The Spirit of X21
Senior Member
Senior Member
Posts: 746
Joined: Fri Apr 28, 2006 4:21 pm
Location: Providence, RI, USA
Contact:

#6 Post by The Spirit of X21 » Mon Oct 08, 2007 10:27 pm

I'm a Taiyo Yuden fan, but if you can't get your hands on TY, Verbatim is very good as well (or so I've read.)
X61 - 3GB, 80GB SSD

rbena
Sophomore Member
Posts: 223
Joined: Thu May 11, 2006 6:09 pm
Location: New Zealand

Re: UJ-842 DVD-RW problem

#7 Post by rbena » Wed Oct 10, 2007 8:12 pm

I have quite a quantity of TY's as well. They're rated a cut above the Verbatims, but is best to compare using K-probe or similar test after burning different disks on your specific burner.

I usually find that the Taiyo Yuden or Verbatim 8x DVD-R or DVD+R disks will produce the lowest errors on a specific burner. However, I don't think I've had any of these particular disks fail, as they've been pretty reliable.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 6 guests