T40 SXGA LCD failure

T4x series specific matters only
Post Reply
Message
Author
jtonge
Posts: 3
Joined: Wed Apr 30, 2008 1:07 am
Location: Alamo, CA USA

T40 SXGA LCD failure

#1 Post by jtonge » Wed Apr 30, 2008 1:39 am

My beloved T40 2379 D5U SXGA LCD has failed. I can use a CRT just fine hooked up to the wifes KVM switch and using the Thinkpad keyboard / mouse. Everything else still works. PCDoctor Diags all pass.

The symptoms, when I boot, the LCD works for a few minutes with a red tint, the goes black. I can see can a faint outline on the LCD of the applications that I am using. The CRT connection works fine,

I have read many posts on this forum about such issues and the remedy seems to be, replace the LCD, with a complete LCD assembly.

just want to know if there are any tests that I can perform that may isolate the issue to a specific component in the LCD assembly, like the cable or inverter?

Any help on this issue is appreciated. This Thinkpad is the my workhorse.
T40 2379 D5U for home
T43 2669 P1U for work

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

#2 Post by sjthinkpader » Wed Apr 30, 2008 1:53 am

This is the CCF tube failing. Much like your fluorescent lighting going out. If you are handy and have a good CCF on hand, then replacing it is an option. Otherwise there are members here that offers replacement services.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

jtonge
Posts: 3
Joined: Wed Apr 30, 2008 1:07 am
Location: Alamo, CA USA

#3 Post by jtonge » Wed Apr 30, 2008 2:15 am

sjthinkpader

Thanks for the response.
I have not run into any post about replacing the CCF tube.

Is this part readily available? What the replacement process?
T40 2379 D5U for home
T43 2669 P1U for work

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

#4 Post by sjthinkpader » Wed Apr 30, 2008 2:21 am

I have only replaced the CCF successfully in 15 inch UXGA panels. Basically you bend open the metal tabs on the frame, peel away tape from the frame, lift out the LCD from the frame. The CCF is in a holder on one edge.

I got my CCF from cracked LCD.

The only working 14 inch CCF replacement resulted in waviness due to BEF not being flat.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

jtonge
Posts: 3
Joined: Wed Apr 30, 2008 1:07 am
Location: Alamo, CA USA

#5 Post by jtonge » Wed Apr 30, 2008 2:44 am

I have not been able to locate a source for the CCF tube.

Is replacing just the LCD panel the next best option?
T40 2379 D5U for home
T43 2669 P1U for work

Johan
Moderator1
Moderator1
Posts: 1977
Joined: Mon Mar 07, 2005 2:00 pm
Location: Copenhagen, Denmark

#6 Post by Johan » Wed Apr 30, 2008 3:25 am

jtonge wrote:I have not been able to locate a source for the CCF tube.

Is replacing just the LCD panel the next best option?
Your best option is (no doubt!) to contact forum member jamiphar (James Arndt) who runs Arndt Computer Services - see the thread LCD CCFL Backlight Repair/GPU Rework - I'll fix it for you!. Note the extremely good (!) user feedback that James is continually receiving.

No doubt in my mind - call James! He has also helped me several times, and I just cannot emphasize enough how overly satisfied with his outstanding fine service I am.

Best regards,

Johan
IBM T42p's (2373-Q1U & -Q2U): 2.1 GHz, 15" UXGA FlexView, 2 GB RAM, 128 MB FireGL T2, 128 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
IBM T42 (2373-N1G): 1.8 GHz, 15" SXGA+ FlexView, 2 GB RAM, 64 MB Radeon 9600, 64 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate

sjthinkpader
Senior ThinkPadder
Senior ThinkPadder
Posts: 2908
Joined: Tue Jan 22, 2008 8:29 pm
Location: San Jose, CA

Re: T40 SXGA LCD failure

#7 Post by sjthinkpader » Tue Jan 04, 2011 11:21 pm

My trusty old T43p UXGA now needs a new CCF. It was turning on red for the longest time. Now it just goes blank while in the middle of something. I ordered new CCF from Moniserv in San Francisco. I hope these newer CCF last longer.
T60p 2623-DDU/UXGA IPS/ATI V5200
T60 2623-DCU/SXGA+ IPS/ATI X1400
T43p 2668-H8U/UXGA IPS/ATI V3200
R50p 1832-NU1/UXGA IPS/ATI FireGL T2
X61t 7762-B6U dual touch IPS/64GB SSD
X32 2673-BU6/32GB SSD
755CDV 9545-GBK Transmissive Projection LCD

RealBlackStuff
Admin
Admin
Posts: 17517
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: T40 SXGA LCD failure

#8 Post by RealBlackStuff » Wed Jan 05, 2011 6:10 am

Check my Howto...
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 3 guests