Need pictures of T43 series LCD latch

[billp117]

I replaced my T43 XGA screen with a SXGA+. It works fine...but I accidentally popped out the latch. There is a right and left latch that is connected with a silver piece that connects the two. There is also a spring. For some reason it is binding when I put the pieces back together and tighten all the screws.

If you have any close up pictures of an "open LCD" showing the latches (working smoothly) I would really appreciate it. I think I did not route the wires or antenna correctly.

Thanks, Bill

[underclocker]

Here you go --> T4x LCD w/o bezel

[billp117]

Thank you very much...I will pop it open again to fix the routing of cables.

Regards, Bill