T42 Dead Motherboard

T4x series specific matters only
Post Reply
Message
Author
MarkT42
Posts: 8
Joined: Tue Feb 09, 2010 12:09 pm
Location: London, England

T42 Dead Motherboard

#1 Post by MarkT42 » Tue Feb 09, 2010 12:13 pm

Hi,

I have a T42 with a dead motherboard. Everything else seems fine, CPU monitor, etc as I have tried them on another T42.

I can get a T42 motherboard off ebay easy enough.

Am I wasting my time and I could just as well get a T43 and add the CPU and Screen to this?
Is the plastic chassis the same too?

Many Thanks in advance
Mark

poshgeordie
ThinkPadder
ThinkPadder
Posts: 1101
Joined: Sat Feb 09, 2008 6:19 pm
Location: Newcastle upon Tyne, UK
Contact:

Re: T42 Dead Motherboard

#2 Post by poshgeordie » Tue Feb 09, 2010 4:54 pm

Hi Mark and welcome to the forums

When you say the board is dead, do any of the indicators light up on the display, or the fan run?

Check the fuses on the board first if you have a testmeter, especially F2 by the power connector, which is the main fuse for the board and dqn blow.

If you can't check it, PM me and I'll have a look at it for you.

MarkT42
Posts: 8
Joined: Tue Feb 09, 2010 12:09 pm
Location: London, England

Re: T42 Dead Motherboard

#3 Post by MarkT42 » Wed Feb 10, 2010 4:40 am

Hi Nick,

Thanks for your reply.

yes the fan starts and the lights come on, but that's about it.
I've looked at your PDF and there appears to be many fuses. None of which look easy for me to replace.
Is this something that is usually returned to someone like yourself for repair?
The laptop is at home today.

I return to my initial question, is it possible to just fit my screen to a T43.
The reason I'm interested in a T43 over a T42 is that it's ATI video drivers are Windows 7 supported and thus I can get back to the full set of video modes including 1920 x 1280 which I can't get with T42 & Windows 7 currently.

Many Thanks
Mark

poshgeordie
ThinkPadder
ThinkPadder
Posts: 1101
Joined: Sat Feb 09, 2008 6:19 pm
Location: Newcastle upon Tyne, UK
Contact:

Re: T42 Dead Motherboard

#4 Post by poshgeordie » Wed Feb 10, 2010 5:47 am

Hi Mark

Bad news is that the T42 may have an unsoldered graphics chip which I can repair for you using Infra red reflowing. See the blue banner at the top of the page for more details and / or send me an email to nick@reflowrepairs.com and I'll send you further details and a quote.

Regarding the screen swap, that should be OK too providing you swap over the complete T42 screen and lcd cable (ie don't remove the screen from the T42 lid and put it in the T43 lid).

MarkT42
Posts: 8
Joined: Tue Feb 09, 2010 12:09 pm
Location: London, England

Re: T42 Dead Motherboard

#5 Post by MarkT42 » Wed Feb 10, 2010 6:12 am

Thanks Again Nick,

One last question.

Will a T43 motherboard slot straight into the T42 case I have?

Many Thanks
Mark

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15740
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

Re: T42 Dead Motherboard

#6 Post by ajkula66 » Wed Feb 10, 2010 7:38 am

It will fit in the case, however, you'll need new CPU, fan, RAM and slot cage.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: T61p

PMs requesting personal tech support will be ignored.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T4x Series”

Who is online

Users browsing this forum: No registered users and 9 guests