strange dock II P/N

Message

zver17 · #1 Post by **zver17** » Sat Mar 12, 2005 9:44 pm

I cannot find any references whatsoever for "IBM ThinkPad A T R X Dock II 62P4547 FRU P/N 13R0290" advertised on ebay as suitable for T40 etc. I have a T42 and would expect it to work, but wanted to confirm.. Does anybody know anything about this dock?

Leon · #2 Post by **Leon** » Sun Mar 13, 2005 1:51 pm

I don't know about IBM links, but it will work....

Please add location and other pertinent information to your profile. Not required, but appreciated....

zver17 · #3 Post by **zver17** » Sun Mar 13, 2005 4:09 pm

thanks Leon. It seems this type of dock comes without power supply. It may run on the T42 adapter (72W) but I suspect it might be best to get a true dock-II supply. Do you know what is the power rating for the standard dock II power supply and (ideally) its part number. thanks in advance for help.

Leon · #4 Post by **Leon** » Sun Mar 13, 2005 5:09 pm

are you sure it doesn't come with one? In any case ANY standard 72W IBM Power Supply will work.. there is no "official" separate one for the dock...

JHEM · #5 Post by **JHEM** » Sun Mar 13, 2005 5:56 pm

The Dock II comes with a built-in power supply and only requires an AC cord to operate.

The Mini-Dock comes with a separate 120W power supply for the unit that's approximately four times the size of the standard 72W T4X power supply.

Regards,

James

Leon · #6 Post by **Leon** » Sun Mar 13, 2005 7:17 pm

Thanks James! The info I found said the Dock II needed 72W and didn't list a seperate Power Brick part #, so I assumed it was the same. So, zver17, "built in" is even better. I bet it comes with a cord. If not, a new one will only cost a few dollars.

FrankK-F · #7 Post by **FrankK-F** » Sun Mar 13, 2005 11:57 pm

Has anyone experience with DOCK-II (e.g. 2631-20U) and PCI frame grabber cards .. analog and/or digital video-IN? What card and what SW did you use?

Frank K-F

strange dock II P/N

strange dock II P/N

Who is online