A foot on the TP

Message

Cecilia76 · #1 Post by **Cecilia76** » Sun Mar 13, 2005 5:06 pm

Hallo,

my girlfriend put a foot on my TP for error: she is veery thin and as soon as she realized what she did she took off the foot.
We checked the TP and everything seems to be ok: there is only a non-uniform light on the right side but I am not sure there wasn't before.
Anything else to do to check it?

Thanks, C.

Leon · #2 Post by **Leon** » Sun Mar 13, 2005 5:18 pm

if there is no visually perceptible physical damage, and the machine appears to be working ok, you are probably fine......

Cecilia76 · #3 Post by **Cecilia76** » Sun Mar 13, 2005 5:47 pm

The only thing I can notice is a light on one side of the TP with a black background. Non visible with other color.
Maybe it was also present before. Is it normal?
The black is clearer is one or two points of the side.

C.

rssb · #4 Post by **rssb** » Sun Mar 13, 2005 9:33 pm

it is possible you might have developed a pressure point on the LCD, if that is the case if you reseat the lcd it might be ok

Leon · #5 Post by **Leon** » Sun Mar 13, 2005 9:40 pm

If it's only visible when the screen is black, and it subtle enough that you are not sure whether it was there before, I would leave it alone....

Cecilia76 · #6 Post by **Cecilia76** » Mon Mar 14, 2005 3:51 am

Thanks everybody.
I think I will go on this way and wait to see if any other problem comes out.

C.

A foot on the TP

A foot on the TP

Who is online